How to replace the rear brake backing plate on Chevrolet Cobalt?

Start by supporting the vehicle then follow this by removing wheel assembly and Brake Backing Plate replacement. The first step is to remove the Brake Drum followed by removing the brake shoes. Remove both the universal spring from the Brake Backing Plate and then the Wheel Cylinder. After releasing the rear park brake cable end fitting from the drum Brake Backing Plate remove the wheel bearing/hub assembly. The replacement ends with removing the Brake Backing Plate. Begin your installation by placing the new Brake Backing Plate then install the wheel bearing/hub assembly. Fasten the rear park brake cable end fitting to the Brake Backing Plate before installing the Wheel Cylinder and universal spring on the backing plate. Brake shoes need to be installed and the drum brakes adjusted. The Brake Drum should be installed before performing both pressure and manual methods of hydraulic brake system bleeding. Add the tire and wheel assembly and then lower the vehicle to its original position.

OEM Chevrolet Cobalt Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Backing Plates found

View related parts
Chevrolet Cobalt Backing Plate, Rear Passenger Side
Part Number: 22705358
$8.46 MSRP: $11.84
You Save: $3.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Backing Plate, Green Line, Rear
Part Number: 22705357
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear
- Replaces: 25785110
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Backing Plate, Passenger Side
Part Number: 25994647
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Backing Plate, Driver Side
Part Number: 25994646
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Backing Plate
Part Number: 15839049
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Backing Plate
Part Number: 15839048
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cobalt Brake Backing Plate

Our website offers an extensive catalog of genuine Chevrolet Cobalt Brake Backing Plate at unbeatable prices. Every OEM Chevrolet Cobalt Brake Backing Plate comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cobalt Brake Backing Plate Parts Questions & Experts Answers

Backing Plate, Rear Passenger Side
22705358
Q: How to replace the rear brake backing plate on Chevrolet Cobalt?
A: Start by supporting the vehicle then follow this by removing wheel assembly and Brake Backing Plate replacement. The first step is to remove the Brake Drum followed by removing the Brake Shoes. Remove both the universal spring from the Brake Backing Plate and then the Wheel Cylinder. After releasing the rear park brake cable end fitting from the drum Brake Backing Plate remove the wheel bearing/hub assembly. The replacement ends with removing the Brake Backing Plate. Begin your installation by placing the new Brake Backing Plate then install the wheel bearing/hub assembly. Fasten the rear park brake cable end fitting to the Brake Backing Plate before installing the Wheel Cylinder and universal spring on the backing plate. Brake shoes need to be installed and the drum brakes adjusted. The Brake Drum should be installed before performing both pressure and manual methods of hydraulic brake system bleeding. Add the tire and wheel assembly and then lower the vehicle to its original position.