How to remove and replace the rear brake caliper bracket on Chevrolet Cobalt?

When fixing the rear brake caliper belt you must first secure the brake caliper with mechanic's wire to stop it from falling. Keep the hydraulic flexible brake hose attached. Remove the brake caliper from its bracket first and keep the hose connected before taking out the brake pads along with their retainers from the bracket. When using the same bracket clean the pad contacting areas from all detritus and rust buildup. Check the disc Brake Pad retainers for damage to mounting tabs, rust build-up, and to see if bracket and disc movement is loose; replace damaged hardware at this time. You need to remove the bolts that attach the caliper mounting bracket to the rear axle before disconnecting it. Visualize the bracket for signs of breaks and cracks that make the entire part unsafe to use again. Look for easy movement and wear on the brake caliper guide pins (1, 4) of the guide pin boots while also checking for any limitations or damage; use replacements when necessary. When installing the brake caliper mounting bracket onto the rear axle use this self-retaining fastener joint without thread-locking compounds and refrain from cleaning threads to avoid damage. At 115 n.m (85 lb ft) torque, secure the brake caliper mounting bracket bolts into place. Apply silicone brake lubricant to pad hardware pieces while leaving the rest of the parts clean. Install the Brake Pad retainers to the Brake Caliper Bracket after you prepare their surfaces. Position wear sensor equipped disc brake pads with their leading edge facing forward as part of the rotor during forward wheel movement or position the bottom side towards the brake rotor when mounted in vehicle position. After placing the brake pads onto the Brake Caliper Bracket you must remove the support and position the brake caliper back over the brake pads.

OEM Chevrolet Cobalt Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Caliper Brackets found

View related parts
Chevrolet Cobalt Caliper Mount, Red Line, Front Passenger Side Part Number: 22720702
$17.78 MSRP: $98.89
You Save: $81.11 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Caliper Mount, Red Line, Front Driver Side Part Number: 22687786
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Caliper Support, Rear Part Number: 25869424
Product Specifications
- Other Name: Bracket-Rear Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Caliper Mount, Red Line, Front Driver Side Part Number: 22720703
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Caliper Support, Passenger Side Part Number: 22705360
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Caliper Support, Driver Side Part Number: 22705359
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Caliper Mount, Red Line, Passenger Side Part Number: 22687787
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cobalt Brake Caliper Bracket

Want to cut long-term maintenance and repair costs? Choose OEM Brake Caliper Bracket. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cobalt parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cobalt Brake Caliper Bracket includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Cobalt Brake Caliper Bracket is one of the strategic parts which signify the relevancy and effectiveness of Chevrolet Cobalt braking system. This Brake Caliper Bracket is specifically created to safely support the brake pads and to provide constant contact pressure on the brake rotors so that the braking torque and the corespondent safety shall be properly met. The brochure of Chevrolet Cobalt that started to be produced in models starting from 2004 depicts another part-Brake Caliper Brackets, whereby similar to the case of the intake manifold, the design and material used in the production of the Brake Caliper Brackets may differ to reflect the new innovation in the market or in the car manufacturing firm in terms of engineering and material composition of the part to increase its durability and performance. Therefore, it is essential to maintain a Brake Caliper Bracket across generations obviously present in Chevrolet Cobalt's first and second models, to keep the braking system optimal for better handling of the vehicle. Precisely because of its durability, the Chevrolet Cobalt Brake Caliper Bracket plays the crucial role in improving safety and to some degree- confidence when driving because of the guaranteed reliable brake system. Flavoured with features like advanced structural styling and enhanced corrosion, Chevrolet Cobalt Brake Caliper Bracket adds up to the automobile world being an ideal choice for all the car lovers in search of relying products. Lastly, the Chevrolet Cobalt Brake Caliper Bracket is highly essential in the proper operation of the Chevrolet Cobalt because this adds to the efficiency of the compact automobile.

Chevrolet Cobalt Brake Caliper Bracket Parts Questions & Experts Answers

Caliper Support, Driver Side
22705359
Q: How to remove and replace the rear brake caliper bracket on Chevrolet Cobalt?
A:
When fixing the rear brake caliper belt you must first secure the brake caliper with mechanic's wire to stop it from falling. Keep the hydraulic flexible brake hose attached. Remove the brake caliper from its bracket first and keep the hose connected before taking out the Brake Pads along with their retainers from the bracket. When using the same bracket clean the pad contacting areas from all detritus and rust buildup. Check the disc Brake Pad retainers for damage to mounting tabs, rust build-up, and to see if bracket and disc movement is loose; replace damaged hardware at this time. You need to remove the bolts that attach the caliper mounting bracket to the rear axle before disconnecting it. Visualize the bracket for signs of breaks and cracks that make the entire part unsafe to use again. Look for easy movement and wear on the brake caliper guide pins (1, 4) of the guide pin boots while also checking for any limitations or damage; use replacements when necessary. When installing the brake caliper mounting bracket onto the rear axle use this self-retaining fastener joint without thread-locking compounds and refrain from cleaning threads to avoid damage. At 115 n.m (85 lb ft) torque, secure the brake caliper mounting bracket bolts into place. Apply silicone brake lubricant to pad hardware pieces while leaving the rest of the parts clean. Install the Brake Pad retainers to the Brake Caliper Bracket after you prepare their surfaces. Position wear sensor equipped disc brake pads with their leading edge facing forward as part of the rotor during forward wheel movement or position the bottom side towards the brake rotor when mounted in vehicle position. After placing the brake pads onto the Brake Caliper Bracket you must remove the support and position the brake caliper back over the brake pads.