How to replace the front brake caliper bracket on 2008 Chevrolet Cobalt?

When replacing the front Brake Caliper Bracket support the caliper with heavy mechanic's wire to maintain the hydraulic flexible brake hose during installation. Maintain attachment of the hydraulic brake flexible hose while extracting the brake caliper from its mounting bracket. The next step involves removing brake pads alongside their retainers from their positions on the caliper bracket. Maintain proper pad hardware mating surface cleanliness on the caliper bracket before using the same bracket again. Check disc Brake Pad retainers for bent mounting tabs alongside examining their condition regarding excessive corrosion and both mounting bracket and pad looseness. Replace them if they fail to meet integrity standards. The component requires replacement if detects any issues. First detach the bracket from the Steering Knuckle while removing the brake caliper mounting bracket bolts. The caliper bracket requires inspection to verify if it contains bending or cracks or damage that warrants bracket replacement. The brake caliper guide pins (1, 4) should undergo movement tests to check guide pin boots for normal wear as well as the absence of restriction, looseness, seizing or tears. Replace as needed. Recent the brake caliper mounting bracket to the Steering Knuckle through installation with the brake caliper mounting bracket bolts achieving 115 n.m (85 lbft) torque. High-temperature silicone brake lubricant should be applied thinly to the hardware mating areas of the caliper bracket while cleaning the pad retainers' mating areas with brake pads. First install Brake Pad retainers before adding brake pads with the wearable sensor directional edge pointing toward the brake rotor. Remove the support before relocating the brake caliper toward the mounting bracket which holds the brake pads.

OEM 2008 Chevrolet Cobalt Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Caliper Brackets found

View related parts
2008 Chevrolet Cobalt Caliper Mount, Red Line, Front Passenger Side
Part Number: 22720702
$17.78 MSRP: $98.89
You Save: $81.11 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Item Weight: 4.30 Pounds
- Item Dimensions: 8.6 x 8.8 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22720702
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Caliper Mount, Red Line, Front Driver Side
Part Number: 22720703
$17.64 MSRP: $98.12
You Save: $80.48 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.9 x 8.8 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22720703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Caliper Mount, Red Line, Front Driver Side
Part Number: 22687786
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Item Weight: 2.90 Pounds
- Item Dimensions: 7.6 x 4.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22687786
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Caliper Support, Passenger Side
Part Number: 22705360
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.2 x 4.2 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705360
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Caliper Support, Driver Side
Part Number: 22705359
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
- Position: Driver Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.2 x 4.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705359
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Caliper Mount, Red Line, Passenger Side
Part Number: 22687787
Product Specifications
- Other Name: Bracket-Front Brake Caliper; Brake Caliper Bracket; Caliper Support; Bracket, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Item Weight: 2.90 Pounds
- Item Dimensions: 7.7 x 4.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22687787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Cobalt Caliper Support, Rear
Part Number: 25869424
Product Specifications
- Other Name: Bracket-Rear Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
- Position: Rear
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.9 x 9.3 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25869424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS

2008 Chevrolet Cobalt Brake Caliper Bracket

With a comprehensive array of OEM 2008 Chevrolet Cobalt Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Cobalt Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the front brake caliper bracket on 2008 Chevrolet Cobalt?
A: When replacing the front Brake Caliper Bracket support the caliper with heavy mechanic's wire to maintain the hydraulic flexible brake hose during installation. Maintain attachment of the hydraulic brake flexible hose while extracting the brake caliper from its mounting bracket. The next step involves removing brake pads alongside their retainers from their positions on the caliper bracket. Maintain proper pad hardware mating surface cleanliness on the caliper bracket before using the same bracket again. Check disc Brake Pad retainers for bent mounting tabs alongside examining their condition regarding excessive corrosion and both mounting bracket and pad looseness. Replace them if they fail to meet integrity standards. The component requires replacement if detects any issues. First detach the bracket from the Steering Knuckle while removing the brake caliper mounting bracket bolts. The caliper bracket requires inspection to verify if it contains bending or cracks or damage that warrants bracket replacement. The brake caliper guide pins (1, 4) should undergo movement tests to check guide pin boots for normal wear as well as the absence of restriction, looseness, seizing or tears. Replace as needed. Recent the brake caliper mounting bracket to the Steering Knuckle through installation with the brake caliper mounting bracket bolts achieving 115 n.m (85 lbft) torque. High-temperature silicone brake lubricant should be applied thinly to the hardware mating areas of the caliper bracket while cleaning the pad retainers' mating areas with brake pads. First install Brake Pad retainers before adding brake pads with the wearable sensor directional edge pointing toward the brake rotor. Remove the support before relocating the brake caliper toward the mounting bracket which holds the brake pads.