How to replace the rear wheel bearing/hub assembly on a disc brake system on Chevrolet Cobalt?

You must lift and stabilize the vehicle before taking apart the tire and wheel assembly to replace the rear Wheel Bearing hub assembly in disc brake systems. First disconnect the hydraulic brake flex hose then take out the rear brake caliper and bracket assembly together with the bracket. Afterward detach and remove the rear brake rotor. Take off the Wheel Bearing hub assembly nuts by first disconnecting the Wheel Speed Sensor electrical connector. Pull out the Wheel Bearing and hub unit along with the brake plate backing from the rear axle structure. Align the Wheel Bearing/hub assembly with the Brake Backing Plate onto the rear axle assembly but always follow the fastener notice first. Secure the Wheel Bearing/hub assembly nuts to the axle with equal lots connecting in a cross-direction and turn until they reach 45 nm (33 ft-lbs) and add an extra 30 degrees torque. Set the Wheel Speed Sensor electrical connector in place and put on both brake rotor and brake caliper including its bracket. After installing all parts return the tire and wheel back to the vehicle while lowering it to the ground.

OEM Chevrolet Cobalt Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Wheel Bearings found

View related parts
Chevrolet Cobalt Hub Assembly, Red Line, Front
Part Number: 22701520
$136.08 MSRP: $253.94
You Save: $117.86 (47%)
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Front Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Disc Brake Hardware Kit; Front Hub; Bearing, Front Wheel Inner; Bearing, Front Wheel
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Hub Assembly, Red Line, Front
Part Number: 19259801
$257.97 MSRP: $505.08
You Save: $247.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Front Wheel; Disc Brake Hardware Kit; Front Hub; Bearing, Front Wheel Inner
- Position: Front
- Replaces: 22715554
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Inner Seal, Front
Part Number: 12785906
$54.67 MSRP: $109.78
You Save: $55.11 (51%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Drive Axle Shaft; Intermed Shaft Bearing; Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Hub Assembly, Rear
Part Number: 15889806
$81.99 MSRP: $242.70
You Save: $160.71 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Hub & Bearing Assembly; Axle Bearing.; Hub & Bearing; Hub & Bearing Assembly; Bearing, Rear Wheel
- Position: Rear
- Replaced by: 19259816
- Replaces: 22715555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Hub Assembly, Red Line, Front
Part Number: 22701516
Product Specifications
- Other Name: Bearing Assembly, Front Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Disc Brake Hardware Kit; Front Hub; Bearing, Front Wheel Inner
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Hub Assembly, Rear
Part Number: 15839051
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Hub & Bearing Assembly; Bearing, Rear Wheel
- Position: Rear
- Replaces: 22671548
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Hub Assembly, Rear
Part Number: 15798483
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub; Rear Hub; Hub & Bearing; Hub & Bearing Assembly; Bearing, Rear Wheel
- Position: Rear
- Replaces: 10399802, 22721886
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Hub Assembly, Rear
Part Number: 15839050
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Hub & Bearing Assembly; Bearing, Rear Wheel
- Position: Rear
- Replaces: 22671547
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cobalt Wheel Bearing

Our website offers an extensive catalog of genuine Chevrolet Cobalt Wheel Bearing at unbeatable prices. Every OEM Chevrolet Cobalt Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cobalt Wheel Bearing Parts Questions & Experts Answers

Hub Assembly, Rear
15889806
Q: How to replace the rear wheel bearing/hub assembly on a disc brake system on Chevrolet Cobalt?
A: You must lift and stabilize the vehicle before taking apart the tire and wheel assembly to replace the rear Wheel Bearing hub assembly in disc brake systems. First disconnect the hydraulic brake flex hose then take out the rear brake caliper and bracket assembly together with the bracket. Afterward detach and remove the rear brake rotor. Take off the Wheel Bearing hub assembly nuts by first disconnecting the Wheel Speed Sensor electrical connector. Pull out the Wheel Bearing and hub unit along with the brake plate backing from the rear axle structure. Align the Wheel Bearing/hub assembly with the Brake Backing Plate onto the rear axle assembly but always follow the fastener notice first. Secure the Wheel Bearing/hub assembly nuts to the axle with equal lots connecting in a cross-direction and turn until they reach 45 nm (33 ft-lbs) and add an extra 30 degrees torque. Set the Wheel Speed Sensor electrical connector in place and put on both brake rotor and brake caliper including its bracket. After installing all parts return the tire and wheel back to the vehicle while lowering it to the ground.

Related Chevrolet Cobalt Parts

Browse Chevrolet Cobalt Wheel Bearing by Years

2010 2009 2008 2007 2006 2005