Make sure this part fits

GM 15839048
Backing Plate

2003-2010 GM

Customer Questions & Expert Answers (11)
GM 15839048 Backing Plate
  • Part Description
    Plate, Brake Flange/Backing; Brake Dust Shield
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2010 Chevrolet CobaltBase, LS, LT, LTZ, Sport, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2006-2008 Chevrolet HHRLS, LS Panel, LT, LT Panel, SS4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2004-2008 Chevrolet MalibuBase, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2007-2009 Pontiac G5Base, GT4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    2003-2007 Saturn Ion1, 2, 3, Red Line4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15839048 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15839048 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be put back in place after adjusting the drum brakes for the 2006 Chevrolet Cobalt? Posted by Customer
    A:
    The brake drum.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the next step after installing the rear wheel bearing and hub assembly for the 2010 Chevrolet Cobalt? Posted by Customer
    A:
    Reconnect the rear park brake cable end fitting to the drum brake backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be installed after the new brake backing plate for the 2009 Chevrolet Cobalt? Posted by Customer
    A:
    Install the wheel bearing/hub assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be installed after the new brake backing plate for the 2008 Chevrolet Cobalt? Posted by Customer
    A:
    Install the wheel bearing/hub assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What comes after installing the wheel cylinder and universal spring for the 2007 Chevrolet Cobalt? Posted by Customer
    A:
    Install the brake shoes and adjust the drum brakes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step in the installation process for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Secure the new brake backing plate in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be done with the rear park brake cable for the 2006 Chevrolet HHR? Posted by Customer
    A:
    Release the rear park brake cable end fitting from the drum brake backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What should be removed after taking off the tire and wheel assembly for the 2008 Chevrolet HHR? Posted by Customer
    A:
    Remove the brake drum and the brake shoes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What are the final steps after reassembling the brake components for the 2007 Chevrolet Malibu? Posted by Customer
    A:
    Reinstall the universal spring and brake shoes, then remove the jack stand or support fixture from the lower control arm assembly. Adjust the drum brakes, install the brake drum, and bleed the brake hydraulic system. Finally, lower the vehicle and check the rear alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What components need to be reinstalled after securing the upper control arm for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Reinstall the universal spring and brake shoes, then remove the jack stand or support fixture from the lower control arm assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Backing Plate 15839048 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15839048 Backing Plate is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15839048 Backing Plate fits certain Chevrolet Malibu, Cobalt, HHR models, as well as Pontiac G5. Additionally, it is compatible with Saturn Ion models.
The original GM component designated by manufacturer part number 15839048 maintains top performance when functioning as the Plate, Brake Flange/Backing; Brake Dust Shield unit at its Rear. The component 15839048 is constructed from durable material and its dimensions span 12.2 x 11.6 x 4.2 inches while weighing 3.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15839048 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.