How to replace the rear brake backing plate on 2008 Chevrolet HHR?

To replace the rear Brake Backing Plate, initial, lift and retain the car and unmount the tire and wheel assembly. Next, remove the Brake Drum and take out the brake shoes. Remove the universal spring from the Brake Backing Plate, while removing the Wheel Cylinder. Release the rear park brake cable end fitting from the drum Brake Backing Plate and remove think bearing/hub assembly before finally removing the Brake Backing Plate. For installation, start by attaching the nuovo Brake Backing Plate, then attaching the wheel bearing/hub assembly and attaching the end fitting of the rear park brake cable to the new backing plate. Install the Wheel Cylinder and the universal spring to the backing plate and then the brake shoes. Change the drum brakes and fit the Brake Drum. Bleed your hydraulic brake system using both manual and pressure on it, then install your tire and the wheel assembly followed by lowering you the vehicle.

OEM 2008 Chevrolet HHR Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Backing Plates found

View related parts
2008 Chevrolet HHR Backing Plate, Rear Passenger Side
Part Number: 22705358
$8.46 MSRP: $11.84
You Save: $3.38 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.1 x 13.7 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705358
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
2008 Chevrolet HHR Backing Plate, Green Line, Rear
Part Number: 22705357
Product Specifications
- Other Name: Shield, Rear Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Rear
- Replaces: 25785110
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.1 x 13.7 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22705357
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
2008 Chevrolet HHR Backing Plate, Front Passenger Side
Part Number: 25884778
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.7 x 12.7 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25884778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet HHR Backing Plate, Front Driver Side
Part Number: 25884779
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 12.1 x 10.1 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25884779
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet HHR Backing Plate
Part Number: 15839049
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 3.30 Pounds
- Item Dimensions: 12.1 x 12.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15839049
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet HHR Backing Plate
Part Number: 15839048
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Rear
- Item Weight: 3.30 Pounds
- Item Dimensions: 12.2 x 11.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15839048
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2008 Chevrolet HHR Brake Backing Plate

With a comprehensive array of OEM 2008 Chevrolet HHR Brake Backing Plate, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Brake Backing Plate are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the rear brake backing plate on 2008 Chevrolet HHR?
A: To replace the rear Brake Backing Plate, initial, lift and retain the car and unmount the tire and wheel assembly. Next, remove the Brake Drum and take out the brake shoes. Remove the universal spring from the Brake Backing Plate, while removing the Wheel Cylinder. Release the rear park brake cable end fitting from the drum Brake Backing Plate and remove think bearing/hub assembly before finally removing the Brake Backing Plate. For installation, start by attaching the nuovo Brake Backing Plate, then attaching the wheel bearing/hub assembly and attaching the end fitting of the rear park brake cable to the new backing plate. Install the Wheel Cylinder and the universal spring to the backing plate and then the brake shoes. Change the drum brakes and fit the Brake Drum. Bleed your hydraulic brake system using both manual and pressure on it, then install your tire and the wheel assembly followed by lowering you the vehicle.