How to replace the air conditioning evaporator core on Chevrolet Impala?

A replacement of the air conditioning evaporator core begins with removing the HVAC module assembly as well as all outer seals. Extract the recirculation housing then free the retaining clip of the defroster actuator to proceed with the actuator removal. Drilling the upper screws from the HVAC module assembly case allows you to split the case apart. Extract the evaporator core together with the water core filter after removing the HVAC module assembly seal from the lower module case. The water core filter installation begins by connecting it to the evaporator before applying new side, upper and two lower seals onto the evaporator core. Insert the HVAC module assembly seal into the lower module case before setting the evaporator core inside the lower case. The guide should be aligned before fastening the upper and lower parts of the HVAC module assembly case while utilizing the appropriate fasteners in their correct locations according to specifications. Paints and lubricants together with corrosion inhibitors should never be applied to fasteners since these substances affect clamping force and torque values. Always apply correct tightening sequences together with specifications to minimize any potential damage. The HVAC module assembly procedure ends after installing its upper screws at 1.5 Nm (13 lb in) and reattaching the defroster actuator and recirculation housing with its screws torqued equally before finishing installation.

OEM Chevrolet Impala Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Evaporators found

View related parts
Chevrolet Impala Evaporator Core
Part Number: 84409866
$161.66 MSRP: $301.66
You Save: $140.00 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Kit-A/C; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator Kit, A/C Evaporator
- Replaces: 23473614, 23114666, 23364141, 84161032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Evaporator Core
Part Number: 84409864
$205.88 MSRP: $423.08
You Save: $217.20 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Kit-A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator Kit, A/C Evaporator; Evaporator
- Replaces: 22743932, 22972092, 84161031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Impala | LS, LT, Premier | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Evaporator Core
Part Number: 89019127
$272.13 MSRP: $492.54
You Save: $220.41 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator, Air Conditioner Evaporator; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator, A/C Evaporator; Evaporator
- Replaces: 89018288
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2013 Chevrolet Impala | 50th Anniversary Edition, Base, LS, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Evaporator Core
Part Number: 52494359
$207.09 MSRP: $388.90
You Save: $181.81 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Evaporator Assembly, A/C; A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator, A/C Evaporator
- Replaces: 52470116, 52469136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Evaporator Core
Part Number: 52494507
$201.75 MSRP: $361.88
You Save: $160.13 (45%)
Product Specifications
- Other Name: Evaporator Kit, Air Conditioner Evaporator; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator; Evaporator Kit, A/C Evaporator
- Replaces: 52469295, 52481159
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Impala | Base, LS, LS Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Evaporator Core
Part Number: 3058130
Product Specifications
- Other Name: Evaporator, A/C (W/Case); A/C Evaporator Core Repair Kit; A/C Evaporator; Evaporator, A/C Evaporator; Core, A/C Evaporator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chevrolet Impala | Base | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS

Chevrolet Impala Evaporator

Our website offers an extensive catalog of genuine Chevrolet Impala Evaporator at unbeatable prices. Every OEM Chevrolet Impala Evaporator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Impala Evaporator Parts Questions & Experts Answers

Evaporator Core
52494507
Q: How to replace the air conditioning evaporator core on Chevrolet Impala?
A: A replacement of the air conditioning evaporator core begins with removing the HVAC module assembly as well as all outer seals. Extract the recirculation housing then free the retaining clip of the defroster actuator to proceed with the actuator removal. Drilling the upper screws from the HVAC module assembly case allows you to split the case apart. Extract the evaporator core together with the water core filter after removing the HVAC module assembly seal from the lower module case. The water core filter installation begins by connecting it to the evaporator before applying new side, upper and two lower seals onto the evaporator core. Insert the HVAC module assembly seal into the lower module case before setting the evaporator core inside the lower case. The guide should be aligned before fastening the upper and lower parts of the HVAC module assembly case while utilizing the appropriate fasteners in their correct locations according to specifications. Paints and lubricants together with corrosion inhibitors should never be applied to fasteners since these substances affect clamping force and torque values. Always apply correct tightening sequences together with specifications to minimize any potential damage. The HVAC module assembly procedure ends after installing its upper screws at 1.5 Nm (13 lb in) and reattaching the defroster actuator and recirculation housing with its screws torqued equally before finishing installation.