How to Properly Handle Transmission Oil Cooler Hose Replacement on Chevrolet Impala?

A replacement of the transmission fluid cooler hose/pipe requires disconnecting the transaxle oil cooler (TOC) outlet hose that runs from the top side of the Radiator. After properly raising the vehicle place it on supports and remove the toc hose retainer bolt while setting a drain pan under the oil cooler hoses. Disconnect all transmission fluid cooler hoses starting from the transaxle whereas the outlet hose comes off first then proceed to the inlet hoses on the Radiator before removing all components from the vehicle. The installation process requires that enough space exists around transaxle oil cooler pipes and hoses to prevent difficulties with wear or damage. Before reinstalling the toc hoses onto the vehicle they must be attached to the Radiator support retainer at the top followed by the Radiator and finally the transaxle. Install the toc hose retainer and bolt with 25 nm (18 lb ft) torque setting then lower the vehicle before applying the toc outlet hose to the Radiator top side. Taking care to avoid excessive fluid quantity will prevent damaging foam formation and the subsequent loss of fluid and transmission shift complaints while protecting device components. Conclude the procedure by following guidelines for transmission fluid level adjustment that combine proper fluid checks and recommended fluids as well as approximate capacity figures.

OEM Chevrolet Impala Transmission Oil Cooler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Transmission Oil Cooler Hoses found

View related parts
Chevrolet Impala Outlet Hose Part Number: 23171463
$19.65 MSRP: $32.38
You Save: $12.73 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line
- Replaced by: 19433677
- Replaces: 20911194, 20820588
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS, LT, LTZ, Premier | 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Inlet Hose Part Number: 22908800
$20.22 MSRP: $33.31
You Save: $13.09 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Cooler Inlet; Line; Pipe, Transmission Oil Cooler
- Replaced by: 19433673
- Replaces: 20820589, 20911193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS, LT, LTZ, Premier | 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Outlet Pipe Part Number: 22875224
$31.87 MSRP: $52.17
You Save: $20.30 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler
- Replaces: 20863972
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Inlet Hose Part Number: 20863973
$29.03 MSRP: $47.78
You Save: $18.75 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Fluid Cooler Inlet; Pipe, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | Police | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Inlet Hose Part Number: 15264590
$32.54 MSRP: $53.59
You Save: $21.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Cooler Inlet; Hose, Transmission Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Chevrolet Impala Transmission Oil Cooler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Transmission Oil Cooler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Transmission Oil Cooler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Impala Transmission Oil Cooler Hose functions as a critical installation which increases Chevrolet Impala vehicle reliability and operational performance. The transmission oil temperature regulation depends on this hose as it protects both efficiency and engine temperature control. The Transmission Oil Cooler Hose extends from the oil to the cooler where it helps to disperse heat produced from operation thus safeguarding oil fermentation under extreme conditions. This hose fits Chevrolet Impala vehicles of different models to smoothly connect to the cooling system which enables quick oil temperature control while maintaining optimal temperatures within acceptable ranges. A well-functioning Transmission Oil Cooler Hose supports the lifetime maintenance of Impala engines for performance-driven vehicle models. The special features of Chevrolet Impala Transmission Oil Cooler Hose consist of its strong construction elements that provide protection from wear and offer impressive durability for automotive applications. The product design combines maximum safety features with efficiency aspects which provides drivers with reassurance. The Chevrolet car Transmission Oil Cooler Hose stands as a vital performance and safety component for the iconic full-sized sedan because it Trusts its reliability to keep the the automaker model operating at its peak.

Chevrolet Impala Transmission Oil Cooler Hose Parts Questions & Experts Answers

Inlet Hose
15264590
Q: How to Properly Handle Transmission Oil Cooler Hose Replacement on Chevrolet Impala?
A:
A replacement of the transmission fluid cooler hose/pipe requires disconnecting the transaxle oil cooler (TOC) outlet hose that runs from the top side of the Radiator. After properly raising the vehicle place it on supports and remove the toc hose retainer bolt while setting a drain pan under the oil cooler hoses. Disconnect all transmission fluid cooler hoses starting from the transaxle whereas the outlet hose comes off first then proceed to the inlet hoses on the Radiator before removing all components from the vehicle. The installation process requires that enough space exists around transaxle oil cooler pipes and hoses to prevent difficulties with wear or damage. Before reinstalling the toc hoses onto the vehicle they must be attached to the Radiator support retainer at the top followed by the Radiator and finally the transaxle. Install the toc hose retainer and bolt with 25 nm (18 lb ft) torque setting then lower the vehicle before applying the toc outlet hose to the Radiator top side. Taking care to avoid excessive fluid quantity will prevent damaging foam formation and the subsequent loss of fluid and transmission shift complaints while protecting device components. Conclude the procedure by following guidelines for transmission fluid level adjustment that combine proper fluid checks and recommended fluids as well as approximate capacity figures.