How to replace the wheel drive axle shaft on Chevrolet Monte Carlo?

Start wheel drive shaft replacement by properly raising and supporting the vehicle. Begin the replacement by first removing the tire then the stabilizer shaft link after taking off the wheel. You should first unscrew the front wheel drive shaft nut but afterward you must insert a drift together with a flat-bladed tool between the caliper and rotor to avoid rotation. A mechanic should separate the Ball Joint from the Steering Knuckle followed by disconnecting the outer tie rod assembly from the Steering Knuckle. The hub spindle remover tool (J 42129) should detach the front wheel drive axle from its bearing on the front wheel drive shaft so you can reinstall the nut partially to safeguard its threads. Detach the left front wheel drive axle or the right front wheel drive axle from the transaxle through the use of the Axle Shaft remover (J 33008-A) extended with the Axle Shaft remover extension (J 29794) when united with the slide hammer (J 2619-01). To install the front wheel drive axle (1, 2), place it into the transaxle while keeping the front wheel drive shaft retaining ring in place through inner housing grip and outward force. Avoid pulling on the Axle Shaft. The front wheel drive shaft bearing receives the install of the front wheel drive axle afterward connect the Ball Joint alongside outer tie rod assembly to the Steering Knuckle using a drift or flat-bladed tool to stop rotor movement before tightening the new front wheel drive shaft nut to 160 nm (118 ft. Lbs.). Complete the process by putting back the stabilizer shaft link as well as wheel and tire and dropping the vehicle before checking transaxle fluid level and wheel alignment.

OEM Chevrolet Monte Carlo Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Axle Shafts found

View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 23191340
$252.52 MSRP: $474.22
You Save: $221.70 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; CV Axle Assembly; Axle Shaft; CV Axle; Axle
- Position: Front Passenger Side
- Replaces: 20859643, 26073396, 26073385, 88965660, 88965658
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Driver Side Part Number: 20859642
Product Specifications
- Other Name: Shaft Assembly-Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Axle; Shaft, Front Wheel Drive Axle
- Position: Front Driver Side
- Replaces: 26073399, 88965659, 88965657, 26073386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 19256583
Product Specifications
- Other Name: Shaft, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft, Front Wheel Drive Axle
- Position: Front Passenger Side
- Replaces: 26073392, 88965661
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LT, SS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Driver Side Part Number: 15850526
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; CV Axle Assembly; Axle Shaft; CV Axle
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly Part Number: 26064130
Product Specifications
- Other Name: Shaft Kit; Axle Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26064129
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; Axle Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Shaft Part Number: 26040555
Product Specifications
- Other Name: Shaft, Front; Axle Shafts; Shaft
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Shaft, Rear Part Number: 22512850
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26040719
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26040718
Product Specifications
- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Part Number: 26019842
Product Specifications
- Other Name: Shaft Kit Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 26019841
Product Specifications
- Other Name: Shaft Kit-Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Wheel Drive Axle
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Axle Assembly, Front Passenger Side Part Number: 15850525
Product Specifications
- Other Name: Shaft, Front Wheel Drive Axle; CV Axle Assembly; Axle Shaft; CV Axle
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | SS | 8 Cyl 5.3 L GAS

Chevrolet Monte Carlo Axle Shaft

Want to cut long-term maintenance and repair costs? Choose OEM Axle Shaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Axle Shaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Axle Shaft of Chevrolet Monte Carlo autos is an important part with the capacity to turn individually to ensure better grip to the ground for the vehicle's wheels. These steel shafts are also in different forms including solid axles primarily found on trucks/older RWD car while the halfshafts are for vehicles that have independent suspension. A fixed transaxle is incorporated and the differential and axle shafts are situated on the axles, while half shafts transmit torque from the transaxle to the wheels. Axle shafts may get rusty and worn from the ground contact hence may require new bearings or seals while the halfshaft may need repair because the CV Joints may be worn out or the boots may have rips and may cause noise and vibrations. In general, the Axle Shaft is a critical component on the Chevrolet Monte Carlo cars that supports the car weight, transfers the driving torque, and ensures the correct wheel positioning.

Chevrolet Monte Carlo Axle Shaft Parts Questions & Experts Answers

Axle Assembly, Front Passenger Side
23191340
Q: How to replace the wheel drive axle shaft on Chevrolet Monte Carlo?
A:
Start wheel drive shaft replacement by properly raising and supporting the vehicle. Begin the replacement by first removing the tire then the stabilizer shaft link after taking off the wheel. You should first unscrew the front wheel drive shaft nut but afterward you must insert a drift together with a flat-bladed tool between the caliper and rotor to avoid rotation. A mechanic should separate the Ball Joint from the Steering Knuckle followed by disconnecting the outer tie rod assembly from the Steering Knuckle. The hub spindle remover tool (J 42129) should detach the front wheel drive axle from its bearing on the front wheel drive shaft so you can reinstall the nut partially to safeguard its threads. Detach the left front wheel drive axle or the right front wheel drive axle from the transaxle through the use of the Axle Shaft remover (J 33008-A) extended with the Axle Shaft remover extension (J 29794) when united with the slide hammer (J 2619-01). To install the front wheel drive axle (1, 2), place it into the transaxle while keeping the front wheel drive shaft retaining ring in place through inner housing grip and outward force. Avoid pulling on the Axle Shaft. The front wheel drive shaft bearing receives the install of the front wheel drive axle afterward connect the Ball Joint alongside outer tie rod assembly to the Steering Knuckle using a drift or flat-bladed tool to stop rotor movement before tightening the new front wheel drive shaft nut to 160 nm (118 ft. Lbs.). Complete the process by putting back the stabilizer shaft link as well as wheel and tire and dropping the vehicle before checking transaxle fluid level and wheel alignment.