How to replace the engine oil pressure switch on Chevrolet Monte Carlo?

If you need to replace the engine oil pressure sensor or switch, you will first need to raise and support the vehicle. Pull off the engine oil pressure switch electrical connector and disconnect it and remove the oil pressure switch. For installation, make sure you adhere to the Fastener Notic, followed by its installation of the engine oil pressure switch, tightening it to 16Nm (12ft. lbs.). Finally, connect the electrical connector of engine oil pressure switch and lower the vehicle.

OEM Chevrolet Monte Carlo Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Oil Pressure Switches found

View related parts
Chevrolet Monte Carlo Pressure Switch Part Number: 12674782
$33.56 MSRP: $57.14
You Save: $23.58 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Oil Pressure; Pressure Sensor/Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12621649, 12621659, 12570798
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Oil Pressure Sensor Part Number: 12677836
$53.05 MSRP: $91.11
You Save: $38.06 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Switch; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12562230, 12614969, 12559780, 12556117, 12573107, 12616646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo
View related parts
Chevrolet Monte Carlo Pressure Switch Part Number: 12635954
$31.13 MSRP: $51.28
You Save: $20.15 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Engine Oil Pressure Indicator; Oil Pressure Sensor; Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Switch, Engine Oil Pressure/Temperature
- Replaced by: 19436252
- Replaces: 12575007, 25036853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Pressure Switch Part Number: 12575008
$37.26 MSRP: $61.39
You Save: $24.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Engine Oil Pressure Indicator; Engine Oil Pressure Switch; Oil Pressure Sensor; Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Switch, Engine Oil Pressure/Temperature
- Replaced by: 19436257
- Replaces: 24505975
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Oil Pressure Switch Part Number: 10002798
Product Specifications
- Other Name: Switch, Automatic Choke Control; Oil Pressure Sensor; Oil Pressure Sending Unit; Engine Oil Pressure/Temperature Switch; Electrical Switches
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Monte Carlo | Base, LS, SS | 8 Cyl 5.0 L GAS
View related parts
Chevrolet Monte Carlo Oil Pressure Sending Unit Part Number: 19244933
$38.52 MSRP: $60.34
You Save: $21.82 (37%)
Product Specifications
- Other Name: Sensor, Engine Oil Pressure/Temperature; Oil Pressure Switch; Sender, Engine Oil Pressure/Temperature
- Replaces: 14036243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS, SS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Oil Pressure Switch Part Number: 14014599
Product Specifications
- Other Name: Switch; Oil Pressure Sensor; Oil Pressure Sending Unit; Switch, Engine Oil Pressure/Temperature
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1988 Chevrolet Monte Carlo | Base, LS | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet Monte Carlo Oil Pressure Sending Unit Part Number: 3815936
Product Specifications
- Other Name: Switch Assembly-Oil Pressure; Oil Pressure Switch; Switch, Engine Oil Pressure/Temperature; Switch, Oil Pressure Or Temperature
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Monte Carlo | Base | 8 Cyl 5.7 L DIESEL
View related parts
Chevrolet Monte Carlo Oil Pressure Switch Part Number: 19244517
Product Specifications
- Other Name: Switch Assembly, Fuel Pump & Engine Oil Pressure Indicator; Oil Pressure Sensor; Oil Pressure Sending Unit; Switch; Switch, Engine Oil Pressure/Temperature; Switch, Fuel Pump Pressure
- Replaces: 25037044, 25037205
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

Chevrolet Monte Carlo Oil Pressure Switch

Want to cut long-term maintenance and repair costs? Choose OEM Oil Pressure Switch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Oil Pressure Switch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Monte Carlo Oil Pressure Switch is a key component that helps to illustrate the dependability and excellence of Chevrolet's well-known Monte Carlo brand. This switch is indeed very vital for it is responsible for monitoring the oil pressure level and thereby helping the driver to note any variation that may compromise the general health of the engine. The Chevrolet Monte Carlo Oil Pressure Switch provides the perfect pressure of Oil to maintain efficiency, and at the same time it protects the internal part of the car engine. Designed for use on all Monte Carlo models manufactured from 1969 up to 2007 this switch has proved very dependable for all the generations ranging from the highly successful V8 engines to the latest V6 generation engines. High and low oil pressure designs of the Chevrolet Monte Carlo Oil Pressure Switch aid in informing the driver of such conditions which are damaging to the engine. The solid build and its desirability in terms of precision and mechanism are considered to be a marvel in the automotive industry which is evidently highlighted by Chevrolet. Also, the function of the Oil Pressure Switch in the vehicle makes the performance of the engine to be smooth hence, adding to the luxury image of the Monte Carlo. Being the legendary name in the history of automobiles and especially in Chevrolet's story, Chevrolet Monte Carlo Oil Pressure Switch continues to play a crucial role in the case of tune-up and service of these timeless cars, thus creating a special place in every true car lover's mind and garage.

Chevrolet Monte Carlo Oil Pressure Switch Parts Questions & Experts Answers

Pressure Switch
12635954
Q: How to replace the engine oil pressure switch on Chevrolet Monte Carlo?
A:
If you need to replace the engine oil pressure sensor or switch, you will first need to raise and support the vehicle. Pull off the engine oil pressure switch electrical connector and disconnect it and remove the oil pressure switch. For installation, make sure you adhere to the Fastener Notic, followed by its installation of the engine oil pressure switch, tightening it to 16Nm (12ft. lbs.). Finally, connect the electrical connector of engine oil pressure switch and lower the vehicle.