How to replace the front brake line on a dual piston caliper on Chevrolet S10?

Before working on a dual piston caliper front brake hose you must raise your vehicle and take off its front wheel and tire. Uncover dirt on both brake hoses and brake pipe fitting before loosening the brake pipe fitting at the brake hose fitting and at the frame. Protected brake pipe fitting ends with caps shield the fluid from escaping and getting dirty. After cleaning brake hardware, unfasten the brake pipe retainer and its screws from the upper Control Arm and the brake hose bolt from the caliper alongside its gaskets to remove the front brake hose. Pull out all stuck metal gaskets that are trapped in the brake hose bolt. Use new copper gaskets with the brake hose bolt during installation while keeping the hose straightaway from suspension parts. Replace the front brake hose onto the brake caliper then fasten the bolt to 54 nm (40 ft. Lbs.) tightness. Insert the brake hose into the brake pipe fitting before tightening the fitting at 17 nm using a back up wrench while keeping the rubber cap removed. Push the brake hose retention bracket onto the upper Control Arm before adding a bolt and nut that requires a tight force of 22 nm (16 ft. Lbs.). Afterward, fasten the brake hose clip to the vehicle's body. Close the bleeder valve after bleeding the hydraulic system and put back the wheel and tire. Lower the car afterward.

OEM Chevrolet S10 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Brake Lines found

View related parts
Chevrolet S10 Flex Hose, Rear Part Number: 19366755
$35.53 MSRP: $66.72
You Save: $31.19 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 22113466, 17989773
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-2003 Chevrolet S10 | Baja, Base, EL, LS, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Brake Hose, Rear Part Number: 19169863
$16.46 MSRP: $29.40
You Save: $12.94 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 09767001, 18031947, 9767001
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Front Part Number: 19174039
$12.90 MSRP: $23.04
You Save: $10.14 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaces: 22113473, 18032822
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1999 Chevrolet S10 | Base, EL, LS, SS, Tahoe, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose Part Number: 9767269
$12.64 MSRP: $22.58
You Save: $9.94 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaced by: 19173207
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Rear Part Number: 9767001
$16.46 MSRP: $29.40
You Save: $12.94 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Replaced by: 19169863
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Front Driver Side Part Number: 19173227
$20.53 MSRP: $36.67
You Save: $16.14 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 09768949, 9768949, 18031967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Brake Hose, Front Part Number: 19173207
$12.64 MSRP: $22.58
You Save: $9.94 (45%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 9767269, 09767269, 18031946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Passenger Side Part Number: 22163652
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Driver Side Part Number: 22163651
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Passenger Side Part Number: 22113472
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Driver Side Part Number: 22113471
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet S10 | Base, EL, LS, SS, Tahoe, ZR2 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose Part Number: 17999904
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2001 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Pipe Part Number: 15618245
Product Specifications
- Other Name: Pipe, Hydraulic Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose Part Number: 15158652
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Passenger Side Part Number: 15158650
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Driver Side Part Number: 15158649
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Brake Hose Part Number: 15098630
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Line
- Position: Rear
- Replaces: 15061710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Rear Part Number: 19366728
$34.41 MSRP: $61.44
You Save: $27.03 (44%)
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 22163464
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Flex Hose, Front Passenger Side Part Number: 19173228
$20.53 MSRP: $36.67
You Save: $16.14 (45%)
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 09768950, 9768950, 18031968
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Brake Line

Want to cut long-term maintenance and repair costs? Choose OEM Brake Line. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Brake Line includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

So, now coming to the component, the Chevrolet S10 Brake Line is as crucial as other components of hydraulic brake system which links the master cylinder directly to the brake caliper pistons to supply the brake fluid. Brake line used metal, which corrodes and also subjected to impact so easily causing the fluid leak and finally loss of hydraulic pressure. Other regular damages include physical breakage and internal wear of the brake hoses that directly impact the vehicle's braking system. When it comes to replacement solutions, the pre-bend brake line kits and the direct replacement brake hoses can be used and they are easy to use as well as they do not corrode easily. Switching from the rubber type to the steel braided hose can also give a much better feel, especially in cases of spirited driving.

Chevrolet S10 Brake Line Parts Questions & Experts Answers

Brake Hose
15098630
Q: How to replace the front brake line on a dual piston caliper on Chevrolet S10?
A:
Before working on a dual piston caliper front brake hose you must raise your vehicle and take off its front wheel and tire. Uncover dirt on both brake hoses and brake pipe fitting before loosening the brake pipe fitting at the brake hose fitting and at the frame. Protected brake pipe fitting ends with caps shield the fluid from escaping and getting dirty. After cleaning brake hardware, unfasten the brake pipe retainer and its screws from the upper Control Arm and the brake hose bolt from the caliper alongside its gaskets to remove the front brake hose. Pull out all stuck metal gaskets that are trapped in the brake hose bolt. Use new copper gaskets with the brake hose bolt during installation while keeping the hose straightaway from suspension parts. Replace the front brake hose onto the brake caliper then fasten the bolt to 54 nm (40 ft. Lbs.) tightness. Insert the brake hose into the brake pipe fitting before tightening the fitting at 17 nm using a back up wrench while keeping the rubber cap removed. Push the brake hose retention bracket onto the upper Control Arm before adding a bolt and nut that requires a tight force of 22 nm (16 ft. Lbs.). Afterward, fasten the brake hose clip to the vehicle's body. Close the bleeder valve after bleeding the hydraulic system and put back the wheel and tire. Lower the car afterward.