How to replace the Air Bag Clockspring on Chevrolet Silverado 2500?

Start the process of replacing the inflatable restraint steering wheel module coil by disabling the sir system. When servicing the wire harness strap remove the steering column trim covers and disconnect the wire harness assembly before taking off both wire harness straps from the wire harness assembly. Start by removing the wire harness strap from the upper tilt head assembly and afterward remove the retaining ring and the air bag clock spring. Steer away the wave washer from the steering column upper shaft for your task. Position the upper shaft's block tooth at the 12 o'clock mark before installing the wave washer on the steering column upper shaft. Steering column assembly sir comes factory pre-set to its right center position. When centering the pre-assembled air bag clock spring for the steering column upper shaft make sure to keep the correct alignment with the horn tower on the turn signal cancel cam before final installation. Remove and discard the centering tab post-installation while using a gentle pull on the lower coil assembly wire to avoid potential shaft lock interference. The retaining ring should go into place on the upper shaft groove before ensuring its secure installation. Plug in the wire harness assembly into the wire strap while using the upper tilt head assembly to fit the wire harness strap before fastening it to the wire harness assembly. Complete the operation by putting back the steering column trim covers while activating the sir system on.

OEM Chevrolet Silverado 2500 Air Bag Clockspring

Steering Wheel Airbag Coil

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Air Bag Clocksprings found

View related parts
Chevrolet Silverado 2500 Clockspring
Part Number: 19330850
$136.88 MSRP: $204.60
You Save: $67.72 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint System; Air Bag Clockspring
- Replaces: 26087306
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Clockspring
Part Number: 19330023
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint System; Air Bag Clockspring
- Replaces: 26087300
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Clockspring
Part Number: 26101829
$303.56 MSRP: $453.74
You Save: $150.18 (34%)
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Replaces: 26103604
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Clockspring
Part Number: 26101828
$242.42 MSRP: $362.36
You Save: $119.94 (34%)
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Replaces: 26103605, 88963412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Clockspring
Part Number: 19330851
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint System; Air Bag Clockspring
- Replaces: 26072085, 26081119, 26087278, 26081118, 26080928, 26063963, 26049192, 26087318, 26072086
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999 Chevrolet Silverado 2500 | Base, LS, LT | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 2500 Clockspring
Part Number: 26101826
$321.60 MSRP: $480.81
You Save: $159.21 (34%)
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chevrolet Silverado 2500 | Base, LS, LT, WT | 8 Cyl 6.0 L GAS

Chevrolet Silverado 2500 Air Bag Clockspring

Our website offers an extensive catalog of genuine Chevrolet Silverado 2500 Air Bag Clockspring at unbeatable prices. Every OEM Chevrolet Silverado 2500 Air Bag Clockspring comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Silverado 2500 Air Bag Clockspring Parts Questions & Experts Answers

Clockspring
26101828
Q: How to replace the Air Bag Clockspring on Chevrolet Silverado 2500?
A: Start the process of replacing the inflatable restraint steering wheel module coil by disabling the sir system. When servicing the wire harness strap remove the steering column trim covers and disconnect the wire harness assembly before taking off both wire harness straps from the wire harness assembly. Start by removing the wire harness strap from the upper tilt head assembly and afterward remove the retaining ring and the air bag clock spring. Steer away the wave washer from the steering column upper shaft for your task. Position the upper shaft's block tooth at the 12 o'clock mark before installing the wave washer on the steering column upper shaft. Steering column assembly sir comes factory pre-set to its right center position. When centering the pre-assembled air bag clock spring for the steering column upper shaft make sure to keep the correct alignment with the horn tower on the turn signal cancel cam before final installation. Remove and discard the centering tab post-installation while using a gentle pull on the lower coil assembly wire to avoid potential shaft lock interference. The retaining ring should go into place on the upper shaft groove before ensuring its secure installation. Plug in the wire harness assembly into the wire strap while using the upper tilt head assembly to fit the wire harness strap before fastening it to the wire harness assembly. Complete the operation by putting back the steering column trim covers while activating the sir system on.