OEM Chevrolet SSR Power Steering Pump

Chevrolet SSR Power Steering Pump Parts Questions & Experts Answers

• Power Steering Pump
  15267525
  Q: How to replace the power steering pump on Chevrolet SSR?

  A: First remove the Drive Belt and take the pcm from its pcm mounting bracket before placing it aside. The replacement of the Power Steering Pump starts with removing the power steering pressure hose and the Power Steering Pump return hose from the Power Steering Pump. Start by removing Power Steering Pump mounting bolts before removing the Power Steering Pump then uninstalling its Power Steering Pump pulley. It is necessary to take out the Power Steering Pump reservoir in some cases. The first step in installation should include putting in the Power Steering Pump reservoir if applicable followed by installing the Power Steering Pump pulley. The Power Steering Pump should rest in position by lining up with the engine block mounting bolt holes while following all requirements listed in the fastener notice in service precautions. Screw in the mounting bolts of the Power Steering Pump and secure them at 25 nm (18 ft. Lbs. Torque). Join the Power Steering Pump return hose and Power Steering Pump pressure hose to the Power Steering Pump while torquing fittings to 25 nm (18 inch lbs.). Begin by installing the pcm to its bracket followed by the Drive Belt and concluding with power steering system bleeding.