Other Name: Emblem Assembly-Lift Gate *Green; Emblem, End Gate And Rear Door Decoration; Plate, End Gate And Rear Door Decoration; Emblem,Rear End Panel And Tailgate
Replaces: 15910899, 20903626, 20903652, 15910900
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Plate, Body Side Name; Plate, Cab And Load Carrier Outer Side Decoration; Plate, Fuel Door & Body Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006 Chevrolet Suburban 1500 | LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Chevrolet Suburban 1500 Emblem
Our website offers an extensive catalog of genuine Chevrolet Suburban 1500 Emblem at unbeatable prices. Every OEM Chevrolet Suburban 1500 Emblem comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Suburban 1500 Emblem Parts Questions & Experts Answers
Q: How to remove and replace the adhesive retained molding and emblem on Chevrolet Suburban 1500?
A: Start with mold and emblem removal by cleaning a dust-free work area since dust affects adhesive performance. Wipe the adhesive placement area with flash naphtha or an isopropyl alcohol water solution before making it dry completely. Keep the body surface temperature between 27°C (80°F) and 41°C (105°F) when needed. Use moderate heat on the mounting item while maintaining a temperature range from 29°C (80°F) to 32°C (90°F). Take the protection off the adhesive section. To install appliques on the item use a force of 3 to 10 lbs to attach the molding to the body surface before placing 0.12mm (0.005in) thick plastic tape across the area and applying high pressure until the adhesive wets out at about 75 percent. Place the emblem clamp at its center position on the body surface while using foam padding between the clamp and emblem to avoid damage.