How to replace the LH engine mount and engine mount bracket on Chevrolet Trailblazer?

The replacement process starts by disconnecting both the Fan Clutch electric connection and negative Battery Cable. The j 46406 (Fan Clutch Remover and Installer) will extract the cooling Fan Clutch from the Water Pump Pulley so it becomes loose inside the Fan Shroud. Start by disconnecting both the electrical connector from MAP Sensor retainer then taking out the MAP Sensor from the system. The left shock module should be taken out before the frame mount removal procedure begins. Raise the vehicle after removing the right and left upper engine mount nuts then uninstall the right and left lower engine mount nuts. The jack must be set on the Oil Pan carefully while avoiding damage to the oil level sender plus removal of the engine protection shield needs to happen. Use a floor jack with wood support to reach the Oil Pan while the vehicle rests on the ground. Increase the engine height enough to free the engine mount stud. The first step involves removing the left engine mount to bracket nut and then extracting both the mount and the bracket from the nut. After that the technician removes the left engine mount bracket bolts before uninstalling the left engine mount bracket. Disassembly of the left frame engine mount bracket bolts and its bracket can occur when necessary. Start the installation process by installing the left frame engine mount bracket whenever necessary then bolt it securely before torquing bolts to 110 n.m (81 lb ft). The left engine mount bracket needs to be secured with bolts before tightening them to 50 n.m (37 lb ft). First position the left engine mount on its bracket then place the engine onto the mounts before fixing the right and left upper mount nuts to 70 n.m (52 lb ft). After lifting a vehicle one must remove the jack then set the engine protection shield in position before securing it with bolts. Position the right and left lower engine mount nuts before torquing them to 70 n.m (52 lb ft) then lower the vehicle. The installation process ends with left shock module attachment and placement of MAP Sensor and MAP Sensor retainer along with its electrical connector and usage of the j 46406 (Fan Clutch Remover and Installer) to secure the Fan Clutch to the Water Pump Pulley followed by connecting the Fan Clutch electrical connector before reconnecting the negative cable.

OEM Chevrolet Trailblazer Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Engine Mounts found

View related parts
Chevrolet Trailblazer Motor Mount Part Number: 15062381
$53.71 MSRP: $129.48
You Save: $75.77 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Mount, Engine Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Trailblazer Strut Bracket Part Number: 60006233
$29.38 MSRP: $46.02
You Save: $16.64 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Transmission Mounting Support; Transmission Mount Bracket
- Replaces: 42481300
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Motor Mount Part Number: 60003412
$85.75 MSRP: $134.31
You Save: $48.56 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mounting; Engine Mount Bracket; Side Mount
- Replaced by: 60006090
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, LS, LT, RS | 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Motor Mount Part Number: 60003411
$87.01 MSRP: $136.30
You Save: $49.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mounting; Engine Mount Bracket; Side Mount
- Replaced by: 60005993
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Motor Mount Bracket Part Number: 88964337
$83.88 MSRP: $149.38
You Save: $65.50 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Replaces: 15079400
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Trailblazer Motor Mount Bracket Part Number: 88964338
$92.01 MSRP: $144.12
You Save: $52.11 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Replaces: 15079401
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Trailblazer Motor Mount Part Number: 60005993
$87.01 MSRP: $136.30
You Save: $49.29 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mounting; Mount, Engine
- Replaces: 60003411
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Mount Support Part Number: 60002825
$64.68 MSRP: $101.32
You Save: $36.64 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Engine Side; Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Replaced by: 60006668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | L, LS, LT | 3 Cyl 1.2 L GAS
View related parts
Chevrolet Trailblazer Mount Support Part Number: 60002266
$63.20 MSRP: $99.01
You Save: $35.81 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Engine Side; Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
- Replaced by: 60006091
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, LS, LT, RS | 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Mount Bracket Part Number: 55512875
$21.92 MSRP: $34.33
You Save: $12.41 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brace, Engine Mounting; Engine Mount Bracket; Motor Mount
- Replaced by: 55515910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | L, LS, LT | 3 Cyl 1.2 L GAS
View related parts
Chevrolet Trailblazer Support Brace Part Number: 42481285
$5.94 MSRP: $9.31
You Save: $3.37 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brace, Engine Mounting; Motor Mount
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Motor Mount, Front Part Number: 15255897
Product Specifications
- Other Name: Front Mount; Engine Mount Bracket; Mount
- Position: Front
- Replaces: 15237337
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | SS | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Motor Mount Bracket, Passenger Side Part Number: 15062380
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Trailblazer Motor Mount Bracket, Driver Side Part Number: 15062379
$100.58 MSRP: $157.55
You Save: $56.97 (37%)
Product Specifications
- Other Name: Bracket, Engine Mounting
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
Chevrolet Trailblazer Motor Mount, Front Part Number: 15255898
Product Specifications
- Other Name: Front Mount; Engine Mount Bracket; Mount
- Position: Front
- Replaces: 15237338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Chevrolet Trailblazer | SS | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Motor Mount, Front Driver Side Part Number: 15788794
$179.37 MSRP: $282.21
You Save: $102.84 (37%)
Product Specifications
- Other Name: Front Mount; Engine Mount Bracket; Mount
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Trailblazer | Base, LS, LT | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Trailblazer Motor Mount, Front Passenger Side Part Number: 15788793
$170.87 MSRP: $268.88
You Save: $98.01 (37%)
Product Specifications
- Other Name: Front Mount; Engine Mount Bracket; Mount
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Trailblazer | Base, LS, LT | 8 Cyl 5.3 L GAS

Chevrolet Trailblazer Engine Mount

Want to cut long-term maintenance and repair costs? Choose OEM Engine Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Trailblazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Trailblazer Engine Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Trailblazer Engine Mount Parts Questions & Experts Answers

Motor Mount
15062381
Q: How to replace the LH engine mount and engine mount bracket on Chevrolet Trailblazer?
A:
The replacement process starts by disconnecting both the Fan Clutch electric connection and negative Battery Cable. The j 46406 (Fan Clutch Remover and Installer) will extract the cooling Fan Clutch from the Water Pump Pulley so it becomes loose inside the Fan Shroud. Start by disconnecting both the electrical connector from MAP Sensor retainer then taking out the MAP Sensor from the system. The left shock module should be taken out before the frame mount removal procedure begins. Raise the vehicle after removing the right and left upper engine mount nuts then uninstall the right and left lower engine mount nuts. The jack must be set on the Oil Pan carefully while avoiding damage to the oil level sender plus removal of the engine protection shield needs to happen. Use a floor jack with wood support to reach the Oil Pan while the vehicle rests on the ground. Increase the engine height enough to free the engine mount stud. The first step involves removing the left engine mount to bracket nut and then extracting both the mount and the bracket from the nut. After that the technician removes the left engine mount bracket bolts before uninstalling the left engine mount bracket. Disassembly of the left frame engine mount bracket bolts and its bracket can occur when necessary. Start the installation process by installing the left frame engine mount bracket whenever necessary then bolt it securely before torquing bolts to 110 n.m (81 lb ft). The left engine mount bracket needs to be secured with bolts before tightening them to 50 n.m (37 lb ft). First position the left engine mount on its bracket then place the engine onto the mounts before fixing the right and left upper mount nuts to 70 n.m (52 lb ft). After lifting a vehicle one must remove the jack then set the engine protection shield in position before securing it with bolts. Position the right and left lower engine mount nuts before torquing them to 70 n.m (52 lb ft) then lower the vehicle. The installation process ends with left shock module attachment and placement of MAP Sensor and MAP Sensor retainer along with its electrical connector and usage of the j 46406 (Fan Clutch Remover and Installer) to secure the Fan Clutch to the Water Pump Pulley followed by connecting the Fan Clutch electrical connector before reconnecting the negative cable.