How to replace the brake line using the J 45405 Pipe Flaring Tool Kit on Chevrolet Uplander?

For replacing the brake pipe, you will need to use J 45405 Pipe Flaring Tool Kit (J 45405) and make sure you adhere to safety instructions concerning brake fluid irritants. Always use double-walled steel brake pipe to ensure that brake system does not fail and route and secure the replacement pipes correctly with the right fasteners. While servicing, inspect the length of the brake pipe to be replaced and release it from retainers. Measure the amount required for replacing, adding 6.35 mm (0.250 in), for flares on 4.76 pipes mm (3/16 in) diameter. Cut the pipe neatly using the pipe cutter from the J 45405 remove the nylon coating off from the two ends using the right blade from the J45405. Chamfer the pipe ends using the de-burring tool supplied with the J 45405, install the tube nuts, and wipe the pipe and tool free of any contaminants. Loosen the die clamping screw of the J45405, choose and install the appropriate die set and prepare the pipe for flaring. Operate the tool to shape the flare from the right shape and diameter - 7.10 mm (0.279 in) +/- 0.18 mm(0.007 in) of the 4.76 mm(3/16 in) diameter pipe. Form the new pipe to fit, maintain 19 mm (3/4 in) clearance of moving components, and install them with the right unions. Finally, hook up the brake pipe to the retainers, bleed the hydraulic brake system and check for leaks applying brakes.

OEM Chevrolet Uplander Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
Chevrolet Uplander Flex Hose
Part Number: 15899075
$32.74 MSRP: $61.46
You Save: $28.72 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Flex Hose, Front Passenger Side
Part Number: 15899072
$29.76 MSRP: $53.85
You Save: $24.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 10305084, 15817953
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Flex Hose, Rear
Part Number: 19366711
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15899076
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Flex Hose, Front
Part Number: 19366708
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 10305083, 15899071
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Flex Hose, Passenger Side
Part Number: 15899074
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaces: 15232836, 15222312
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Uplander Flex Hose, Driver Side
Part Number: 15899073
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 15232835, 15222311
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Uplander | Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

Chevrolet Uplander Brake Line

Our website offers an extensive catalog of genuine Chevrolet Uplander Brake Line at unbeatable prices. Every OEM Chevrolet Uplander Brake Line comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Uplander Brake Line Parts Questions & Experts Answers

Flex Hose
15899075
Q: How to replace the brake line using the J 45405 Pipe Flaring Tool Kit on Chevrolet Uplander?
A: For replacing the brake pipe, you will need to use J 45405 Pipe Flaring Tool Kit (J 45405) and make sure you adhere to safety instructions concerning brake fluid irritants. Always use double-walled steel brake pipe to ensure that brake system does not fail and route and secure the replacement pipes correctly with the right fasteners. While servicing, inspect the length of the brake pipe to be replaced and release it from retainers. Measure the amount required for replacing, adding 6.35 mm (0.250 in), for flares on 4.76 pipes mm (3/16 in) diameter. Cut the pipe neatly using the pipe cutter from the J 45405 remove the nylon coating off from the two ends using the right blade from the J45405. Chamfer the pipe ends using the de-burring tool supplied with the J 45405, install the tube nuts, and wipe the pipe and tool free of any contaminants. Loosen the die clamping screw of the J45405, choose and install the appropriate die set and prepare the pipe for flaring. Operate the tool to shape the flare from the right shape and diameter - 7.10 mm (0.279 in) +/- 0.18 mm(0.007 in) of the 4.76 mm(3/16 in) diameter pipe. Form the new pipe to fit, maintain 19 mm (3/4 in) clearance of moving components, and install them with the right unions. Finally, hook up the brake pipe to the retainers, bleed the hydraulic brake system and check for leaks applying brakes.