C1500 | 1995-1999 | Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
C1500 Suburban | 1995-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
C2500 | 1995-2000 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C2500 Suburban | 1995-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1995-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1995-1999 | Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
K1500 Suburban | 1995-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
K2500 | 1995-2000 | Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K2500 Suburban | 1995-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K3500 | 1995-2000 | Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Other Name: Valve Assembly-Brake Combination And Bracket; Brake Proportioning Valve; Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
Fits the following GMC Models:
C1500 | 1991-1994 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
C1500 Suburban | 1992-1994 | Base, SLE | 8 Cyl 5.7 L GAS
C2500 | 1991-1994 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C2500 Suburban | 1992-1994 | Base, SLE | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1991-1994 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1991-1994 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
K1500 Suburban | 1992-1994 | Base, SLE | 8 Cyl 5.7 L GAS
K2500 | 1991-1994 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K2500 Suburban | 1992-1994 | Base, SLE | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K3500 | 1991-1994 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Q: How to replace the front brake proportioning valve on GMC Savana 3500?
A: Note down the identification code of the valve before ordering a replacement unit. Place safety stands to support the vehicle after it raises to a suitable height. First remove the retaining bolts from the shield before removing the shield from the vehicle. Attach the combination valve by disconnecting both the 2-way electrical connector alongside brake pipes front and rear. Disconnect the allen bolts from the bpmv to combination valve connection and then remove the combination valve. The new transfer tubes should be completely seated within the valve before you install it to the bpmv. Mount the allen bolts to anchor the combination valve while using an 8 nm torque setting (6 ft. Lbs.) before moving to 16 nm (12 ft. Lbs.). Apply torque of 8 nm to the first stage (6 ft. Lbs.) and increase it to 16 nm for the second stage (12 ft. Lbs.). Connect front and rear brake pipes to combination valve through fittings while applying 30 nm of torque force (22 ft. Lbs.).drill new transfer tubes into the valve before you reattach this to the bpmv. Complete the reconnection of the 2-way electrical connector. Attach the shield to its location by screwing in the retaining bolts until they reach a torque of 12 nm (8 ft. Lbs.). Begin brake hydraulic system bleeding after you depress the metering rod of the combination valve and proceed with the bleeding process.
Q: How to replace the Brake Proportioning Valve on GMC Savana 1500?
A: Before replacing the combination valve, you should raise the vehicle and use safety stands to hold it. Take off the electrical connector from the combination valve, then unplug the front and rear brake pipes. Take out the bolt that holds the combination valve in place and remove the valve. Set the combination valve onto the frame and put in the bolt, tighten it until you reach 10 nm (89 lb in). Tighten the front and rear brake pipes onto the valve with 30 nm (22 lb ft) of torque and then reconnect the electrical connection. At the end, make sure to bleed the brake system in the right way.