Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 88964303
Pressure Valve

2003-2006 GM

Customer Questions & Expert Answers (9)
GM 88964303 Pressure Valve
  • Part Description
    Valve Assembly, Brake Pressure Mode; ABS Control Module
  • Replaces
    88982308
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2006 GMC Sierra 2500 HD Pressure Valve Diagram for 88964303
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 88964303

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2005 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2005 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2005 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2003-2005 GMC Sierra 1500Base, Denali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005, 2003 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2003-2004 GMC Sierra 2500Base, SLE, SLT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 88964303 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88964303 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake proportioning valve on Chevrolet Silverado 2500? Posted by Customer
    A:
    Before getting a new combination valve identify its tag for matching the replacement model. Start by disconnecting the combination valve electrical wire first after removing both brake lines and taking out the assembly from the vehicle. Test that the new combination valve matches the identification code of the original part. Attach the new combination valve directly to the vehicle and join the front and rear brake pipes to it according to the fastener notice before tightening each nut to 25 nm (18 ft. Lbs.). Connect the combination valve electric cable before starting the brake bleeding procedure and make sure that the valve metering rod remains pushed during the process.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake proportioning valve on Chevrolet Silverado 3500? Posted by Customer
    A:
    Before getting a new combination valve identify its tag for matching the replacement model. Start by disconnecting the combination valve electrical wire first after removing both brake lines and taking out the assembly from the vehicle. Test that the new combination valve matches the identification code of the original part. Attach the new combination valve directly to the vehicle and join the front and rear brake pipes to it according to the fastener notice before tightening each nut to 25 nm (18 ft. Lbs.). Connect the combination valve electric cable before starting the brake bleeding procedure and make sure that the valve metering rod remains pushed during the process.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Proportioning Valve on GMC Sierra 1500? Posted by Customer
    A:
    Start by recording the identification code from your existing valve before buying a new combination valve that matches this code. First detach the electrical connector from the combination valve then remove the brake pipes from the front and rear before extracting the valve from the vehicle. The new combination valve installation should feature an identification code that is identical to both the punched pin on the original valve. The process of installation starts by moving the combination valve back into the car followed by attaching front and rear brake pipes to the valve through proper tightening of brake pipe nuts at 25 nm (18 ft. Lbs.). Connect the combination valve electrical connector before performing brake system bleeding while maintaining a compressed position on the combination valve metering rod.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Proportioning Valve on GMC Sierra 3500? Posted by Customer
    A:
    Start by recording the identification code from your existing valve before buying a new combination valve that matches this code. First detach the electrical connector from the combination valve then remove the brake pipes from the front and rear before extracting the valve from the vehicle. The new combination valve installation should feature an identification code that is identical to both the punched pin on the original valve. The process of installation starts by moving the combination valve back into the car followed by attaching front and rear brake pipes to the valve through proper tightening of brake pipe nuts at 25 nm (18 ft. Lbs.). Connect the combination valve electrical connector before performing brake system bleeding while maintaining a compressed position on the combination valve metering rod.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Brake Proportioning Valve on GMC Yukon XL 2500? Posted by Customer
    A:
    You need to locate the identification code of the old combination valve before purchasing its replacement. First disconnect all electrical parts from the combination valve then remove the front and rear brake pipes before taking out the valve assembly. For proper valve installation insert the new combination valve having the same punched id code as the original part. Reinsert the combination valve into its place before connecting the brake pipes. Tighten all brake pipe nuts to 25 nm pression (18 ft. Pounds). Connect the combination valve electrical part while pressing the metering rod after the brake system bleed process. Use proper steps to remove remaining air from the brake lines.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after securing the EBCM for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reconnect the chassis electrical connectors to the EBCM, lower the vehicle, and reconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    How should the EBCM be secured to the BPMV for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the EBCM using new screws, tightening them to 5 Nm (39 inch lbs.) in an X-pattern.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    Q:
    What should be used when installing the new EBCM for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Use new mounting screws and avoid any sealants on the EBCM gasket or mating surfaces.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar ABS Control Module
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pressure Valve 88964303 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88964303 Pressure Valve is available in the market under the name GM ABS Control Module, Brake Proportioning Valve. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88964303 Pressure Valve fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 88964303 maintains top performance when functioning as the Valve Assembly, Brake Pressure Mode; ABS Control Module unit. The component 88964303 is constructed from durable material and its dimensions span 6.7 x 5.2 x 7.7 inches while weighing 5.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Modulator Valve; Valve, Electronic Brake Control. The part 88964303 has available replacement options 88982308. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.