OEM GMC Canyon Power Steering Reservoir

GMC Canyon Power Steering Reservoir Parts Questions & Experts Answers

• Reservoir Tank
  26098206
  Q: How to replace the Power Steering Reservoir on a C13 Series on GMC Canyon?

  A: When replacing the Power Steering Reservoir off the vehicle for the C13 Series start by placing the hydraulic pump on a stationary flat surface while orienting its shaft in an upward direction. You should push the screwdriver onto the retaining clip tab to extend it outward so you can move the reservoir clip away from the hydraulic pump assembly. Remove the hydraulic pump reservoir after sliding out both reservoir clips one by one starting from the first reservoir clip and then the second reservoir clip. Each LOCTITE seal which appears at the reservoir neck or within the hydraulic pump housing must be tossed away. The new LOCTITE seal requires power steering fluid lubrication before it should be installed on the reservoir neck. The hydraulic pump assembly needs the reservoir installed by positioning the reservoir neck to achieve full insertion. Position the reservoir's feet parallel to the hydraulic pump housing sides before installing the provided new clips by ensuring tabs connect completely to the housing.