How to Service and Repair the Steering Shaft in a Tilt Column on GMC Canyon?

If you are replacing the steering column shaft for a tilt column, first you must disable the sir system. When you need to perform the job, take off the tilt spring and in case you need to, the linear shift assembly and the electrical btsi actuator. Next, remove the Ignition Switch and lock housing, then the upper intermediate Steering Shaft and the lower shaft bearing assembly. Remove the pivot pins using the pivot pin remover (J 21854-01). Pull the tilt arm to release the steering wheel protection shoes from the dowel pins in the steering column support assembly, afterward take out the steering column housing assembly. After that, remove the Steering Shaft assembly. Thereafter and for installation, place the Steering Shaft assembly into the steering column housing and install the steering column housing assembly. In positioning the lock shoes to the dowel pins, use the tilt lever followed by rotating the tilt head assembly to align the holes for the pivot pins. Apply lubrication to the new pivot pins with gm p/n 12346293 (Canadian P/N 992723) and press it in far enough to firmly seat it, staking it in at 3 new places. Finally, put on the lower shaft bearing assembly, upper intermediate Steering Shaft, Ignition Switch and lock housing, linear shift assembly if applicable, and the tilt spring and enable sir system.

OEM GMC Canyon Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Steering Shafts found

View related parts
GMC Canyon Intermediate Shaft
Part Number: 84530611
$65.31 MSRP: $102.30
You Save: $36.99 (37%)
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate; Steering Shaft; Upper Shaft
- Replaces: 84363100, 84462303, 84276399, 84159774, 23370453, 23253787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Steering Shaft, Lower
Part Number: 25900714
$110.47 MSRP: $188.06
You Save: $77.59 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Lower Steering; Lower Shaft; Shaft, Steering Column
- Position: Lower
- Replaces: 15299676, 25776339, 15111747
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Steering Shaft
Part Number: 26086243
$77.54 MSRP: $121.45
You Save: $43.91 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column; Upper Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Lower Shaft
Part Number: 86819219
$38.85 MSRP: $60.86
You Save: $22.01 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Upper Shaft
Part Number: 86783121
$57.85 MSRP: $90.61
You Save: $32.76 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft, Steering Column Intermediate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Lower Shaft
Part Number: 84646282
$83.30 MSRP: $143.04
You Save: $59.74 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft-Lower Steering; Steering Shaft; Shaft, Steering Column
- Position: Lower
- Replaces: 23378022, 84039333, 23347488, 84155599, 94770361
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Steering Shaft, Lower
Part Number: 25900715
Product Specifications
- Other Name: Shaft-Lower Steering; Lower Shaft; Shaft, Steering Column
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT | 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Steering Shaft
Part Number: 19256701
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Intermediate Shaft; Coupling Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 15189922
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Upper Shaft
Part Number: 26086277
Product Specifications
- Other Name: Shaft, Steering Column; Steering Shaft
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
GMC Canyon Steering Shaft
Part Number: 19256704
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Coupling Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 25880101
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Steering Shaft
Part Number: 19256700
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Intermediate Shaft; Coupling Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 15189921
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Steering Shaft
Part Number: 19256705
$163.15 MSRP: $256.69
You Save: $93.54 (37%)
Product Specifications
- Other Name: Shaft Assembly, Steering Gear Coupling; Coupling Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 25880102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

GMC Canyon Steering Shaft

Our website offers an extensive catalog of genuine GMC Canyon Steering Shaft at unbeatable prices. Every OEM GMC Canyon Steering Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Canyon Steering Shaft Parts Questions & Experts Answers

Steering Shaft, Lower
25900714
Q: How to Service and Repair the Steering Shaft in a Tilt Column on GMC Canyon?
A: If you are replacing the steering column shaft for a tilt column, first you must disable the sir system. When you need to perform the job, take off the tilt spring and in case you need to, the linear shift assembly and the electrical btsi actuator. Next, remove the Ignition Switch and lock housing, then the upper intermediate Steering Shaft and the lower shaft bearing assembly. Remove the pivot pins using the pivot pin remover (J 21854-01). Pull the tilt arm to release the steering wheel protection shoes from the dowel pins in the steering column support assembly, afterward take out the steering column housing assembly. After that, remove the Steering Shaft assembly. Thereafter and for installation, place the Steering Shaft assembly into the steering column housing and install the steering column housing assembly. In positioning the lock shoes to the dowel pins, use the tilt lever followed by rotating the tilt head assembly to align the holes for the pivot pins. Apply lubrication to the new pivot pins with gm p/n 12346293 (Canadian P/N 992723) and press it in far enough to firmly seat it, staking it in at 3 new places. Finally, put on the lower shaft bearing assembly, upper intermediate Steering Shaft, Ignition Switch and lock housing, linear shift assembly if applicable, and the tilt spring and enable sir system.

Related GMC Canyon Parts

Browse GMC Canyon Steering Shaft by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2012 2011 2010 2009 2008 2007 2006 2005 2004