OEM GMC Canyon Shift Interlock Solenoid

GMC Canyon Shift Interlock Solenoid Parts Questions & Experts Answers

• Lock Actuator
  26094827
  Q: How to service and repair the Shift Interlock Solenoid on GMC Canyon?

  A: The service and repair of the Shift Interlock Solenoid requires users to disable the sir system followed by removing steering column trim covers. The automatic transmission shift lock control actuator electrical connector should be disconnected while you position the shift lever clevis to neutral alignment. You can detach the automatic transmission shift lock control actuator by using a small screwdriver to separate it from the steering column jacket and between the cable shift cam assembly before removal of the actuator. When installing the automatic transmission shift lock control actuator you must first position it correctly on both the steering column jacket along with the cable shift cam assembly before re-establishing the electrical connection. To adjust the actuator first push out the tab from the adjuster block side and compress the internal adjuster spring by pressing on the adjuster block before sliding it fully away from the actuator then secure it in place by pushing the tab back in. Check that the actuator properly locks the shift lever clevis in park before turning the ignition to on position then check that the actuator responds to power activation to shift out of park. The actuator needs readjustment before reinstallation of steering column trim covers followed by sir system activation.