How to replace the rear trunk latch on GMC Envoy?

You must dismantle the liftgate window garnish and trim panel before substituting the liftgate latch. Unclip both components: the handle rod from the bellcrank and the bellcrank rod from the latch assembly. Unscrew the bellcrank screws attached to the latch/lock before removing the bellcrank piece. Remove the electrical connector from its position on the latch assembly plus disconnect the lock cylinder bellcrank rod from its mounting on the latch assembly. Take out the latch/lock assembly by unscrewing it from its mounting position on the liftgate. Position the latch/lock assembly onto the liftgate then install the screws while tightening them to 89 lb in according to the prescribed torque. Join the electrical and lock cylinder bellcrank rod to the latch/lock hardware unit. Place the bellcrank onto the latch/lock assembly structure then thread screws before tightening them to 0.7 newton meter (6 pound inch). Link the button to the handle setup through the bellcrank mechanism while also attaching the door handle rod to the bellcrank. Finish by putting back the trim panel and door window decoration.

OEM GMC Envoy Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Trunk Latches found

View related parts
GMC Envoy Door Jamb Switch
Part Number: 25664288
$66.92 MSRP: $128.76
You Save: $61.84 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
- Position: Rear
- Replaces: 16627973, 25664020, 16632015, 16636561, 22144363, 3635350
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Envoy Window Latch
Part Number: 15840460
$90.15 MSRP: $134.18
You Save: $44.03 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Lift Gate Window; Trunk Latch; Door Lock; Lock; Latch; Latch, End Gate Lock
- Replaces: 15086837, 15132517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Envoy Lock Assembly
Part Number: 15110511
$231.75 MSRP: $352.67
You Save: $120.92 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock, End Gate Lock; Door Lock; Lock
- Replaces: 15159269
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Envoy Window Lock
Part Number: 16635395
Product Specifications
- Other Name: Latch, End Gate Lock; Latch
- Replaces: 16634041, 16635396, 16631756
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

GMC Envoy Trunk Latch

Our website offers an extensive catalog of genuine GMC Envoy Trunk Latch at unbeatable prices. Every OEM GMC Envoy Trunk Latch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Envoy Trunk Latch Parts Questions & Experts Answers

Lock Assembly
15110511
Q: How to replace the rear trunk latch on GMC Envoy?
A: You must dismantle the liftgate window garnish and trim panel before substituting the liftgate latch. Unclip both components: the handle rod from the bellcrank and the bellcrank rod from the latch assembly. Unscrew the bellcrank screws attached to the latch/lock before removing the bellcrank piece. Remove the electrical connector from its position on the latch assembly plus disconnect the lock cylinder bellcrank rod from its mounting on the latch assembly. Take out the latch/lock assembly by unscrewing it from its mounting position on the liftgate. Position the latch/lock assembly onto the liftgate then install the screws while tightening them to 89 lb in according to the prescribed torque. Join the electrical and lock cylinder bellcrank rod to the latch/lock hardware unit. Place the bellcrank onto the latch/lock assembly structure then thread screws before tightening them to 0.7 newton meter (6 pound inch). Link the button to the handle setup through the bellcrank mechanism while also attaching the door handle rod to the bellcrank. Finish by putting back the trim panel and door window decoration.