Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler
Replaced by: 19431947
Fits the following GMC Models:
Sierra 1500 | 2007-2013 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Sierra 2500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Sierra 3500 HD | 2007-2010 | SLE, SLT, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Other Name: Cooler, Power Steering Fluid; Power Steering Oil Cooler; Cooler
Fits the following GMC Models:
C1500 | 1988-1999 | Sierra, Sierra GT, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX, Sierra Special | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
C1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
C2500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
C3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K1500 | 1988-1999 | Sierra, Sierra SL, Sierra SLE, Sierra SLS, Sierra SLT, Sierra SLX, Sierra Special, Sierra Sport | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
K1500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
K2500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K2500 Suburban | 1992-1999 | Base, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
K3500 | 1988-2000 | Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
Q: How to replace the Power Steering Cooler without hydroboost on GMC Yukon?
A: The procedure to change the Power Steering Cooler without hydroboost starts by removing both the fascia grille and the radiator grille reinforcement support based on the vehicle configuration. The technician will drain as much power steering fluid as possible from the reservoir prior to placing drain pans below the vehicle. Disconnect the power steering gear outlet hose from the Power Steering Cooler as well as the Power Steering Cooler hose from the Power Steering Pump. The Power Steering Cooler requires bolt removal before extraction. Set the new Power Steering Cooler onto its positioning and finish its installation through Power Steering Cooler bolts that must be tightened up to 9 n.m (80 lb in). Attach the Power Steering Cooler hose to the Power Steering Pump after which you should connect the power steering gear outlet hose to the Power Steering Cooler. Move all standing fluid and empty the drain pans before filling and performing a bleeding procedure on the power steering system. You should reinstall the radiator grille reinforcement support with the fascia grille when this equipment is present.
Q: How to replace the Power Steering Cooler without hydroboost on GMC Sierra 3500 Classic?
A: The first step to replace a Power Steering Cooler without hydroboost requires removal of the radiator grille followed by power steering fluid reservoir drainage until it becomes empty. Place drain pans underneath the vehicle to catch fluid. Remove the outlet hose of power steering traffic from its connection with the Power Steering Cooler and disconnect the Power Steering Cooler hose from the Power Steering Pump. Drain the power steering fluid from the reservoir before unfastening and extracting the Power Steering Cooler from the vehicle via its bolts. Placing and fastening the Power Steering Cooler at its designated position requires Power Steering Cooler bolts which should be tightened to 9 n.m (80 lb in). After installation position the Power Steering Cooler hose beginning at the Power Steering Pump and at the Power Steering Cooler. After cleaning all excess fluid the technician drains the drain pans then fills and bleeds the power steering system before reattaching the radiator grille.
Q: How to replace the Power Steering Cooler without hydroboost on GMC Sierra 1500?
A: The replacement of the Power Steering Cooler requires starting by taking out the radiator grille first. Start by draining as much power steering fluid from the reservoir and position drain pans under the vehicle. Disconnect the power steering gear outlet hose from the Power Steering Cooler and also disconnect the Power Steering Cooler hose from the Power Steering Pump. First free the Power Steering Cooler by removing all its bolts and remove the cooler from the vehicle. The new Power Steering Cooler requires being positioned in place followed by securing it with Power Steering Cooler bolts while tightening each bolt to 9 nm (80 lb in). Secure the power steering plumbing with the Power Steering Pump towards the Power Steering Cooler. Also join the power steering gear outlet hose with the Power Steering Cooler. First clean all excess liquid before removing drain pans. Subsequently add fluid while performing the power steering system bleeding process. Finally, reinstall the radiator grille.