How to service and repair the rear brake backing plate on GMC Savana 3500?

First, use suitable safety stands to raise and support the vehicle. Pull off the tire and the wheel and then insert the pin into the park brake lever. Second, take off the rear Brake Drum, rear brake shoes, and rear Wheel Cylinder. Next, you unfasten the rear brake anchor pin and the rear Brake Backing Plate retaining bolts and the washer and then, you remove the rear Brake Backing Plate from the vehicle. For installation, reinstall the rear Brake Backing Plate to the place and fix it with retaining bolts and washers, tightening them to 140 nm (104 ft. Lbs.). Mount the rear Wheel Cylinder and the rear brake shoes before taking out the pin from the park brake lever. Line the rear brakes and bleed the brake system via the manual or pressure method. Finally, install the tire and the wheel, set a park brake if there is a need, remove the safety stands to lower the vehicle.

OEM GMC Savana 3500 Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Brake Backing Plates found

View related parts
GMC Savana 3500 Splash Shield, Front Part Number: 25846355
$54.16 MSRP: $106.04
You Save: $51.88 (49%)
ADD TO CART
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Shield, Brake Flange Plate
- Position: Front
- Replaces: 15719023
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2024 GMC Savana 3500 | Base, LS, LT, SLE | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 3500 Backing Plate Part Number: 88982585
$39.92 MSRP: $62.30
You Save: $22.38 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Kit, Parking Brake Apply; Brake Dust Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Backing Plate Part Number: 85566025
$66.85 MSRP: $129.74
You Save: $62.89 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Kit, Parking Brake Apply
- Replaces: 15949893, 88936320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2024 GMC Savana 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
GMC Savana 3500 Backing Plate, Front Passenger Side Part Number: 25918338
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Dust Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Replaces: 15267358, 18061099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
GMC Savana 3500 Splash Shield, Passenger Side Part Number: 19211696
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor; Front Speed Sensor; Shield
- Position: Passenger Side
- Replaces: 15715342
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Splash Shield, Driver Side Part Number: 19211695
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield; ABS Sensor; Front Speed Sensor; Shield
- Position: Driver Side
- Replaces: 15715341
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Backing Plate, Passenger Side Part Number: 15622344
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Backing Plate, Driver Side Part Number: 15622343
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Savana 3500 Backing Plate, Rear Passenger Side Part Number: 14056176
Product Specifications
- Other Name: Plate, Rear Brake Backing (Right-Hand); Brake Dust Shield; Support; Plate, Brake Flange/Backing
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 GMC Savana 3500 | Base, SLE | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC Savana 3500 Backing Plate Part Number: 14056175
Product Specifications
- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield; Support
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 GMC Savana 3500 | Base, SLE | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
GMC Savana 3500 Backing Plate, Front Driver Side Part Number: 25918337
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Dust Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 18061098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2014 GMC Savana 3500 | Base, LS, LT, SLE | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

GMC Savana 3500 Brake Backing Plate

Want to cut long-term maintenance and repair costs? Choose OEM Brake Backing Plate. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 3500 Brake Backing Plate includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Savana 3500 Brake Backing Plate Parts Questions & Experts Answers

Splash Shield, Driver Side
19211695
Q: How to service and repair the rear brake backing plate on GMC Savana 3500?
A:
First, use suitable safety stands to raise and support the vehicle. Pull off the tire and the wheel and then insert the pin into the park brake lever. Second, take off the rear Brake Drum, rear Brake Shoes, and rear Wheel Cylinder. Next, you unfasten the rear brake anchor pin and the rear Brake Backing Plate retaining bolts and the washer and then, you remove the rear Brake Backing Plate from the vehicle. For installation, reinstall the rear Brake Backing Plate to the place and fix it with retaining bolts and washers, tightening them to 140 nm (104 ft. Lbs.). Mount the rear Wheel Cylinder and the rear brake shoes before taking out the pin from the park brake lever. Line the rear brakes and bleed the brake system via the manual or pressure method. Finally, install the tire and the wheel, set a park brake if there is a need, remove the safety stands to lower the vehicle.