Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2002 GMC Savana 3500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
GMC Savana 3500 Wheel Hub
Our website offers an extensive catalog of genuine GMC Savana 3500 Wheel Hub at unbeatable prices. Every OEM GMC Savana 3500 Wheel Hub comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Savana 3500 Wheel Hub Parts Questions & Experts Answers
Q: How to replace the front wheel hub, bearing, and seal on a RWD on GMC Savana 3500?
A: Raise and secure the vehicle to replace its rwd front wheel parts from this step. After you take off the Wheel Speed Sensor bolt securement you can lift out the Wheel Speed Sensor from the equipped wheel structure. Separate the Wheel Hub unit from the Steering Knuckle by removing all bolts afterward. Pull out the Wheel Hub assembly plus bearing and splash shield because the unit. Use wheel bearing grease or similar product to lubricate the Steering Knuckle bore before cleaning all contaminants from this area and the hub and bearing together. Put the Wheel Hub unit with bearing and splash shield onto the Steering Knuckle. Also add Wheel Hub and bearing bolts and torque them to 180 nm (133 ft. Lbs.). Place the Wheel Speed Sensor on the Wheel Hub and bearing and bolt it firmly using 18 nm (13 ft. Lbs.) torque. After that, place the rotor back onto the Wheel Hub and tire then lift the vehicle.