OEM GMC Savana 3500 Brake Drum

GMC Savana 3500 Brake Drum Parts Questions & Experts Answers

• Brake Drum, Rear
  15693468
  Q: How to replace non-demountable rear brake drums on GMC Savana 3500?

  A: Set up safe stands while lifting the vehicle to work on the non-detachable rear brake drums. Put the pin inside the park brake lever before removing the tire and wheel. Make clear marks to note the Brake Drum's position before you disassemble it. Also disconnect the retainer pieces if they exist then take off the Brake Drum. To install the drum brake align it using the relationship mark and set it on the axle and afterwards you can replace rear Brake Drum retainers if they are present. Set the new tire and wheel on the rear axle then release the park brake pin and adjust the rear brakes. Take away the safety stands and let the vehicle down to the ground. Service your wheel brake components properly by never sanding or grounding brake pads plus never cleaning with a dry brush or compressed air because some brake components may have asbestos fibers. The used cloth must be sprayed with water to remove dust before using commercial equipment that stops fiber fallout during washing.