How to service and repair the Steering Angle Sensor on GMC Sierra 1500?

Beginning the repair process requires determining the Steering Angle Sensor type by examining provided illustrations after which sensor collection starts. After sensor identification check that the connector face points toward the right. The current sensor requires no centering operations prior to its removal for reuse. Unplug the sensor connector and extract the sensor out of the adapter-bearing assembly. Installation requires positioning the front of the sensor with foam ring and pin hole centering functionality while setting the rotor flange cuff to be flush with the surface. Before removing the sensor for reuse make a reference point on the rotor flange cuff so the device stays aligned during subsequent installations. A new sensor requires leaving the pin in place unless proper sensor seating occurs. Follow the Steering Shaft alignment for the installation process to mount the sensor into the adapter and bearing assembly before linking the sensor across its interfaces. A pin hole exists on the sensor front alongside a raised rotor flange cuff and an alignment marker. Check that sensor alignment marks match up properly during installment followed by another sensor deployment with detailed note taking of alignment tab observations and double d flat detection on sensor backs. The installation process requires checking pin hole positions carefully alongside maintaining correct alignment marks for correct alignment.

OEM GMC Sierra 1500 Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Angle Sensors found

View related parts
GMC Sierra 1500 Position Sensor
Part Number: 19418403
$58.84 MSRP: $100.20
You Save: $41.36 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly, Steering Wheel Position; Steering Wheel Speed Sensor; Steering Angle Sensor; Sensor, Steering Column
- Replaces: 20910871
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX
View related parts
GMC Sierra 1500 Position Sensor
Part Number: 26104070
$129.89 MSRP: $254.28
You Save: $124.39 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Replaces: 26100011
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 GMC Sierra 1500 | Base, Denali, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Position Sensor
Part Number: 13590209
$71.92 MSRP: $139.58
You Save: $67.66 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Steering Gear Hydraulic Valve; Steering Wheel Speed Sensor; Steering Angle Sensor; Angle Sensor; Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 GMC Sierra 1500 | AT4, Base, Denali, Elevation, SLE, SLT | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Position Sensor
Part Number: 26084178
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Position Sensor
Part Number: 15886733
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
- Replaces: 15112675, 25833069
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Sierra 1500 | Denali, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Position Sensor
Part Number: 26091590
Product Specifications
- Other Name: Sensor Kit, Steering; Steering Wheel Speed Sensor; Sensor
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 GMC Sierra 1500 | Base, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Sierra 1500 Steering Angle Sensor

Our website offers an extensive catalog of genuine GMC Sierra 1500 Steering Angle Sensor at unbeatable prices. Every OEM GMC Sierra 1500 Steering Angle Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sierra 1500 Steering Angle Sensor Parts Questions & Experts Answers

Position Sensor
15886733
Q: How to service and repair the Steering Angle Sensor on GMC Sierra 1500?
A: Beginning the repair process requires determining the Steering Angle Sensor type by examining provided illustrations after which sensor collection starts. After sensor identification check that the connector face points toward the right. The current sensor requires no centering operations prior to its removal for reuse. Unplug the sensor connector and extract the sensor out of the adapter-bearing assembly. Installation requires positioning the front of the sensor with foam ring and pin hole centering functionality while setting the rotor flange cuff to be flush with the surface. Before removing the sensor for reuse make a reference point on the rotor flange cuff so the device stays aligned during subsequent installations. A new sensor requires leaving the pin in place unless proper sensor seating occurs. Follow the Steering Shaft alignment for the installation process to mount the sensor into the adapter and bearing assembly before linking the sensor across its interfaces. A pin hole exists on the sensor front alongside a raised rotor flange cuff and an alignment marker. Check that sensor alignment marks match up properly during installment followed by another sensor deployment with detailed note taking of alignment tab observations and double d flat detection on sensor backs. The installation process requires checking pin hole positions carefully alongside maintaining correct alignment marks for correct alignment.