How to replace the torsion bar and support assembly (bushing style) on GMC Sierra 1500?

The first step to replace bushing-style Torsion Bar and support assembly requires raising and supporting the vehicle. Place the Torsion Bar unloading/loading tool j 36202 onto the crossmember and adjustment arm before beginning the procedure. Apply tension to the adjustment arm with the j 36202 until the adjuster nut and adjustment bolt become unloaded after marking the bolt position. Record the required turns needed for bolt removal. The adjustment bolt and the adjuster nut from the crossmember must be removed before taking out the j 36202 so the Torsion Bar can unload. Remove the adjustment arm and Torsion Bar crossmember bolt from its weld nut before pulling the crossmember out from its mount. Remove the Torsion Bar from the crossmember while keeping in mind that left and right bars differ by design and do not fit one another before extracting all torsion bars from the vehicle. Install the Torsion Bar into its position in the lower Control Arm before placing it on the crossmember mount. Screw the Torsion Bar crossmember bolt into the weld nut before tightening it to 95 n.m (70 lb ft). First position the adjustment arm inside the crossmember before inserting the adjuster bolt and adjuster nut. Insert the Torsion Bar completely into the adjustment arm before reinstalling the j 36202 to both the adjustment arm and crossmember. Apply torque force to the adjustment arm while using j 36202 until the Torsion Bar reaches maximum load. Use the same number of turns on the adjuster bolt as when it was removed. Use the j 36202 to measure the z height after removing it from the crossmember. Next, remove the safety stands and lower the vehicle before taking z height measurements.

OEM GMC Sierra 1500 Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Torsion Bars found

View related parts
GMC Sierra 1500 Torsion Bar, Front Driver Side
Part Number: 19330060
$286.89 MSRP: $451.40
You Save: $164.51 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Ball Joint; Lower Ball Joint; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2010 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front Passenger Side
Part Number: 19330059
$286.89 MSRP: $451.40
You Save: $164.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Ball Joint; Lower Ball Joint; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2010 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front Driver Side
Part Number: 19330058
$286.95 MSRP: $451.49
You Save: $164.54 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528963
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 GMC Sierra 1500 | SL, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front Passenger Side
Part Number: 19330057
$286.95 MSRP: $451.49
You Save: $164.54 (37%)
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528964
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 GMC Sierra 1500 | SL, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front
Part Number: 15048312
$257.64 MSRP: $405.40
You Save: $147.76 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar, Front Torsion
- Position: Front
- Replaced by: 19332932
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Sierra 1500 | SL, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front Passenger Side
Part Number: 19332946
$257.82 MSRP: $405.67
You Save: $147.85 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15528958
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front Driver Side
Part Number: 19332945
$257.82 MSRP: $405.67
You Save: $147.85 (37%)
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15528957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front
Part Number: 19332931
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front
- Replaces: 15048311
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 GMC Sierra 1500 | SL, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front Driver Side
Part Number: 19330062
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Driver Side
- Replaces: 15732338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2007 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Sierra 1500 Torsion Bar, Front Passenger Side
Part Number: 19330061
Product Specifications
- Other Name: Bar, Front Torsion; Bar, Front Chassis
- Position: Front Passenger Side
- Replaces: 15732339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2007 GMC Sierra 1500 | Base, C3, Denali, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

GMC Sierra 1500 Torsion Bar

Our website offers an extensive catalog of genuine GMC Sierra 1500 Torsion Bar at unbeatable prices. Every OEM GMC Sierra 1500 Torsion Bar comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Sierra 1500 Torsion Bar Parts Questions & Experts Answers

Torsion Bar, Front Driver Side
19330060
Q: How to replace the torsion bar and support assembly (bushing style) on GMC Sierra 1500?
A: The first step to replace bushing-style Torsion Bar and support assembly requires raising and supporting the vehicle. Place the Torsion Bar unloading/loading tool j 36202 onto the crossmember and adjustment arm before beginning the procedure. Apply tension to the adjustment arm with the j 36202 until the adjuster nut and adjustment bolt become unloaded after marking the bolt position. Record the required turns needed for bolt removal. The adjustment bolt and the adjuster nut from the crossmember must be removed before taking out the j 36202 so the Torsion Bar can unload. Remove the adjustment arm and Torsion Bar crossmember bolt from its weld nut before pulling the crossmember out from its mount. Remove the Torsion Bar from the crossmember while keeping in mind that left and right bars differ by design and do not fit one another before extracting all torsion bars from the vehicle. Install the Torsion Bar into its position in the lower Control Arm before placing it on the crossmember mount. Screw the Torsion Bar crossmember bolt into the weld nut before tightening it to 95 n.m (70 lb ft). First position the adjustment arm inside the crossmember before inserting the adjuster bolt and adjuster nut. Insert the Torsion Bar completely into the adjustment arm before reinstalling the j 36202 to both the adjustment arm and crossmember. Apply torque force to the adjustment arm while using j 36202 until the Torsion Bar reaches maximum load. Use the same number of turns on the adjuster bolt as when it was removed. Use the j 36202 to measure the z height after removing it from the crossmember. Next, remove the safety stands and lower the vehicle before taking z height measurements.