Other Name: Bushing, Back/Rear Window Glass Reveal; Hinge Bushing; Latch Kit, Latch, Side Door Window Glass, Body Side Rear Window, Striker, Door Lock Striker.
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994-2003 GMC Sonoma | SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1993 GMC Sonoma | Base, GT, SLE, SLS | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
GMC Sonoma Door Striker
Our website offers an extensive catalog of genuine GMC Sonoma Door Striker at unbeatable prices. Every OEM GMC Sonoma Door Striker comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Sonoma Door Striker Parts Questions & Experts Answers
Q: How to replace the front door striker on GMC Sonoma?
A: The front Door Striker replacement process demands initial removal of the front door lower striker bolt as well as the rear door lower striker bolt. The upper bolts need just a bit of loosening to pivot the striker together with its spacer toward the bottom hole where you should install and tighten the lower bolt as needed for plate support. The next step includes removal of the upper striker bolt followed by the spacer (if equipped) as well as the striker itself. The first step for installation begins with attaching the striker along with the spacer (if present) and finally adding the upper striker bolt. The installer should rotate the bottom striker bolt to match the upper threaded position before removing it if the striker backing plate shifted position. The lower threaded hole of the striker backing plate should be aligned while installing both the front door lower striker bolt and then the rear lower striker bolt. To achieve correct door latch engagement you should adjust the Door Striker by loosening the bolts and tightening them to 22 n.m (16 lb ft).