A: Before working with the Wiper Blade lift it upward while maintaining its position so it does not hit the windshield. Pull the Wiper Blade from its slot on the inside radius as you press the locking tab upward with your tool. Move the wiper through its holder to expose the opener in the Wiper Blade. Position the Wiper Blade inside the Wiper Arm hook radius first before adding the Wiper Arm hook through the Wiper Blade opening. Push the hub forward to let the locking mechanism rest in the hook slot then gently put the Wiper Arm and blade onto the windshield.
Q: How to Replace a Wiper Blade Safely on GMC Jimmy?
A: Before working on the Wiper Blade you need to lift the Wiper Arm until it finds its fixed position along the vertical axis to protect the windshield. When ready push down on the Wiper Blade clip's locking tab to free the Wiper Blade. Pull the blade down from its position on the Wiper Arm and slide the whole arm outside through the opening in the Wiper Blade. Position the Wiper Blade over the opening and feed the Wiper Arm hook through to mount the assembly in the correct inner radius of the Wiper Arm. Push the Wiper Arm upward to have the locking tab fit the hook slot before placing it properly on the windshield.
Q: How to Replace the Rear Wiper Blade on an XUV on GMC Envoy?
A: Start the process by positioning the Wiper Arm to the mid-wipe mark and remove it carefully from the park ramp while monitoring its movement to prevent it from striking the end gate. Position the Wiper Arm parallel to the frame then push the Wiper Blade away toward freedom while observing the cam system that secures this part. Open the slack in the Wiper Blade from the Wiper Arm. To attach the Wiper Blade it goes on the Wiper Arm level between the two slots. Then place your hand around the Wiper Arm and push the Wiper Blade's ends together inside the Wiper Arm to connect them. Rest the wiper assembly onto the end gate glass surface while holding the rear Wiper Arm in place.