Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1998-2000 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.7 L GAS
GMC Yukon Air Bag Clockspring
Our website offers an extensive catalog of genuine GMC Yukon Air Bag Clockspring at unbeatable prices. Every OEM GMC Yukon Air Bag Clockspring comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon Air Bag Clockspring Parts Questions & Experts Answers
Q: How to Remove and Replace the Air Bag Clockspring Assembly on GMC Yukon?
A: You must order the air bag clock spring assembly / spiral cable by first straightening your vehicle wheels and applying the Steering Wheel using the Steering Column anti-rotation pin (J 42640), steering column lock, or a strap to stop wheel rotation since this protects the sir system from breaking down. Disconnect the Steering Column and intermediate shaft(s) and steering gear while keeping the front tires stationary to avoid shifting the sir coil assembly out of center. Check that both wheels remain straight while an anti-rotation pin is installed and the ignition key is in lock position before beginning to remove the Steering Wheel along with the Steering Column shroud. Begin by disconnecting electrical connectors and remove and discard the inflatable restraint Steering Wheel module coil retaining ring alongside the inflatable restraint Steering Wheel module coil. The old coil requires disposal when replacement is needed. When installing the new sir coil assembly always keep it centered before removing the centering tab at installation completion. Slip the new inflatable restraint Steering Wheel module coil next to the horn tower on the turn signal switch cancel cam before mounting it onto the Steering Shaft and installing the new retaining ring. Before moving forward install the Steering Wheel but first reconnect all electrical components and discard the centering tab from the new coil assembly. The replacement ends with the removal of anti-rotation pin (J 42640).