Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
GMC Yukon Brake Booster
Our website offers an extensive catalog of genuine GMC Yukon Brake Booster at unbeatable prices. Every OEM GMC Yukon Brake Booster comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon Brake Booster Parts Questions & Experts Answers
Q: How to replace the power vacuum brake booster on GMC Yukon?
A: Start by setting the parking brake and exhaust the vacuum supply by pressing the Brake Pedal three times until it becomes solid. Separate the electrical wires connected to the dod sensor and active booster before removing the vacuum hose from the check valve and taking out the master cylinder nuts while maintaining the connection between brake pipes and the master cylinder. Secure the master cylinder out of the way using mechanics wire before you eliminate the Brake Booster pushrod retainer bolt and both the pushrod retainer and stoplamp switch . Disconnect the pushrod from its Brake Pedal fastening and take out the Brake Booster through its mounting nuts while discarding the gasket. Set the new Brake Booster gasket in place then position the power vacuum Brake Booster with help during installation. Begin by tightening both right-upper and Brake Booster nuts to 33 n.m (24 lb ft). Thread the Brake Booster pushrod into the Brake Pedal pivot hole while adding the stoplamp switch, Brake Booster pushrod retainer, and bolt. Tighten the bolt sequentially to 10 n.m (89 lb in). Install the vacuum hose from the check valve to its proper position while attaching electrical connections to both sensors. Then install the master cylinder by hand and tighten its nuts to 33 n.m (24 lb ft).