How to replace the front brake disc on a 1500 Series on GMC Yukon?

To change the front Brake Disc for a 1500 series vehicle, start out by checking the level of the brake master cylinder reservoir fluid. If the value happens to fall between the maximum and minimum values midway, then pull out fluid in order to provide such a value. Lift the car, and disconnect the tire and wheel assembly. If replacing the original Brake Disc, mark its relationship to the hub. Plug an empty fuel tank if not yet done, and then raise the car's front using the jack stands and arm the parking brake. Support the brake caliper using heavy mechanic wire to avoid the damage of a futuristic brake hose. Take out the brake caliper bolt and caliper as an assembly by removing the two mounting caliper bolts and then supporting the assembly with wire. Pull the Brake Disc retaining push nuts and the Brake Disc screw. Striking the disc with a deadblow hammer will cause the disc to vibrate and slip off the Wheel Hub. If the disc will not come off then clean the surfaces, apply penetrating oil, and start two m10 x 1.5 bolts into the disc's tapped holes then tighten it evenly to push the disc off. During installation, clean out the rust and contaminants from the hub flange using j-42450 -a (Wheel Hub Resurfacing Kit) and the interior diameter of the Brake Disc using j -41013 (Disc Resurfacing Kit). Clean the mating surfaces of the debris, align the disc with its original location, and fix it. Tighten the Brake Disc to 12 nm (106 Lb in) by screwing it, keeping in mind that a belt can be broken when the wrench stretches to adjust its depth with the rod. Replace the brake caliper and bracket, making sure to remove the old adhesive from the mounting bolts and clean the threads of the nuts, and apply a threadlocker gm p/n 12345493 (Canadian P/N10953488), and tighten the two mounting bolts to 200 nm (148 lb ft), as shown in fig. 1. Reattach the tire and wheel assembly, and then with the engine off, work up to about 2/3 pedal travel, release it slowly, and repeat until the pedal is firm. Make sure to fill the master cylinder reservoir with fresh brake fluid where necessary, and you burnish the brake pads and discs if they were refinished or replaced.

OEM GMC Yukon Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Brake Discs found

View related parts
GMC Yukon Brake Rotor
Part Number: 25757802
$152.12 MSRP: $268.83
You Save: $116.71 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Rotor
- Position: Rear
- Replaces: 15712802, 15065077
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Rotor, Front
Part Number: 22950036
$143.63 MSRP: $257.65
You Save: $114.02 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 88963556, 25819670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor, Front
Part Number: 19210603
$102.46 MSRP: $182.96
You Save: $80.50 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060214
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Hub & Rotor
Part Number: 12547510
$153.29 MSRP: $286.04
You Save: $132.75 (47%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor; Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Rotor, Front
Part Number: 22950037
$124.75 MSRP: $223.77
You Save: $99.02 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor
- Position: Front
- Replaced by: 23144341
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor
Part Number: 87839222
$237.14 MSRP: $457.41
You Save: $220.27 (49%)
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Replaces: 84865905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor, Rear
Part Number: 13552815
$116.41 MSRP: $227.91
You Save: $111.50 (49%)
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 13531113, 13532974, 13542117, 13514114
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor
Part Number: 13553983
$137.88 MSRP: $252.98
You Save: $115.10 (46%)
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Replaces: 13514522, 13542112
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor, Rear
Part Number: 87842411
$81.22 MSRP: $156.71
You Save: $75.49 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 84582015
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor
Part Number: 84879622
$258.96 MSRP: $503.20
You Save: $244.24 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake; Rotor, Brakes
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor, Rear
Part Number: 22968231
Product Specifications
- Other Name: Rotor-Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 15792634, 25832103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor, Rear
Part Number: 23195438
Product Specifications
- Other Name: Rotor-Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 22775300
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Rotor, Front
Part Number: 23144340
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Hub & Rotor, Front
Part Number: 19202730
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060222, 19152689, 15981316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2000 GMC Yukon | Base, Denali, SL, SLE, SLT | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Rotor
Part Number: 15544322
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Rotor, Front
Part Number: 15679710
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

GMC Yukon Brake Disc

Our website offers an extensive catalog of genuine GMC Yukon Brake Disc at unbeatable prices. Every OEM GMC Yukon Brake Disc comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon Brake Disc Parts Questions & Experts Answers

Rotor, Front
22950036
Q: How to replace the front brake disc on a 1500 Series on GMC Yukon?
A: To change the front Brake Disc for a 1500 series vehicle, start out by checking the level of the brake master cylinder reservoir fluid. If the value happens to fall between the maximum and minimum values midway, then pull out fluid in order to provide such a value. Lift the car, and disconnect the tire and wheel assembly. If replacing the original Brake Disc, mark its relationship to the hub. Plug an empty fuel tank if not yet done, and then raise the car's front using the jack stands and arm the parking brake. Support the brake caliper using heavy mechanic wire to avoid the damage of a futuristic brake hose. Take out the brake caliper bolt and caliper as an assembly by removing the two mounting caliper bolts and then supporting the assembly with wire. Pull the Brake Disc retaining push nuts and the Brake Disc screw. Striking the disc with a deadblow hammer will cause the disc to vibrate and slip off the Wheel Hub. If the disc will not come off then clean the surfaces, apply penetrating oil, and start two m10 x 1.5 bolts into the disc's tapped holes then tighten it evenly to push the disc off. During installation, clean out the rust and contaminants from the hub flange using j-42450 -a (Wheel Hub Resurfacing Kit) and the interior diameter of the Brake Disc using j -41013 (Disc Resurfacing Kit). Clean the mating surfaces of the debris, align the disc with its original location, and fix it. Tighten the Brake Disc to 12 nm (106 Lb in) by screwing it, keeping in mind that a belt can be broken when the wrench stretches to adjust its depth with the rod. Replace the brake caliper and bracket, making sure to remove the old adhesive from the mounting bolts and clean the threads of the nuts, and apply a threadlocker gm p/n 12345493 (Canadian P/N10953488), and tighten the two mounting bolts to 200 nm (148 lb ft), as shown in fig. 1. Reattach the tire and wheel assembly, and then with the engine off, work up to about 2/3 pedal travel, release it slowly, and repeat until the pedal is firm. Make sure to fill the master cylinder reservoir with fresh brake fluid where necessary, and you burnish the Brake Pads and discs if they were refinished or replaced.