How to replace the rear disc brake pads on the 1500 Series on GMC Yukon?

Check the brake master cylinder fluid level before starting work on the 1500 series rear disc brake pads. Drain the fluid until the level reaches halfway between minimum and maximum markings if the fluid exceeds this point. Lift and secure the vehicle while taking off the tire and wheel unit. Adjust the Brake Caliper Piston with a c-clamp over the housing toward the inboard pads until the piston fully compresses. For guide pin bolt removal keep hand tools handy when tightening an open-end wrench onto the caliper guide pin. Put heavy mechanic wire under the brake caliper to protect the hydraulic brake hose. Pull the bolt that holds the guide pin in place from the brake caliper unit. Then move the caliper upward while keeping it secure in its position. Keep the original Brake Pad positions and springs marked to install them correctly. Also put new retaining springs in each slot. Take off brake pads and retaining springs from their attachment space. Put fresh retaining springs both on the caliper mounting bracket and positions for new brake pads. Fit the brake caliper in place on the mounting bracket then put on the new mounting bolts. Secure the caliper guide pin bolt with 38 n.m torque by gripping the pin with an open end wrench. Reposition the tire and wheel, decline the vehicle, and press the Brake Pedal gently until it reaches 2/3 of its length before letting go. Continue to pump the Brake Pedal until the pedals register a strong resistance to settle the brake caliper pistons and pads. Place clean brake fluid into the brake master cylinder until it reaches the appropriate mark followed by preparing brake rotors and pads with a burnishing process.

How to replace the front disc brake pads on the 2500 Series on GMC Yukon?

Before working on the front brake pads of the 2500 series inspect the brake master cylinder reservoir. If fluid shows above the midpoint between its highest and lowest limits drain it to the midpoint. First lift the vehicle and afterwards take off the tire and wheel components. Apply 2 large c-clamps over the caliper housing to push both brake caliper pistons inward until they are completely compressed. Secure the brake caliper with heavy mechanic wire to keep it safe during brake hose removal when taking out its guide pin bolts. Pull out the brake caliper from its bracket while keeping track of the Brake Pad wear sensor placement applied on it. Check and remove the old retaining springs from the brake caliper then study its internal components. Insert fresh Brake Pad retaining springs onto the caliper bracket before putting the new brake pads inside and placing their wear sensor correctly. Fix the brake caliper to the bracket by inserting guide pin bolts then tightening them to 108 n.m (80 lb ft). Place the wheel back on and lower the vehicle. Without starting the engine apply the brake to about two-thirds of its span before releasing. Keep applying the Brake Pedal for regular cycles until you create a strong brake feeling that lets the caliper pistons and brake pads reach their ideal position. Put clean brake fluid into the brake master cylinder reservoir until it stays at its right level. Also make sure brake pads and discs become perfectly smooth.

OEM GMC Yukon Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Brake Pads found

View related parts
GMC Yukon Brake Pads Part Number: 84320501
$102.16 MSRP: $214.06
You Save: $111.90 (53%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaces: 23135915, 84218390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads Part Number: 84176464
$86.00 MSRP: $178.61
You Save: $92.61 (52%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Disc Brake Pad Set; Rear Pads
- Position: Rear
- Replaced by: 85601646
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads Part Number: 25910432
$126.02 MSRP: $244.58
You Save: $118.56 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Front Pads Part Number: 25910431
$95.20 MSRP: $274.50
You Save: $179.30 (66%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Brake Pads
- Position: Front
- Replaced by: 84233332
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 GMC Yukon | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
GMC Yukon Brake Pads, Red Caliper Part Number: 85524066
$113.81 MSRP: $220.90
You Save: $107.09 (49%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Replaced by: 85663434
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads Part Number: 85537461
$262.75 MSRP: $451.26
You Save: $188.51 (42%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Rear Pads
- Replaces: 84805876
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads, Red Caliper Part Number: 84987498
$263.17 MSRP: $510.76
You Save: $247.59 (49%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads, Red Part Number: 85140320
$70.13 MSRP: $136.11
You Save: $65.98 (49%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Rear Pads; Pad Kit, Brakes
- Replaces: 84474063, 84805877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads, Red Caliper Part Number: 87866865
$283.08 MSRP: $549.39
You Save: $266.31 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Front Pads; Pad Kit, Brakes
- Replaces: 86793188
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Yukon | AT4, Denali, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads, Front Part Number: 25852957
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaces: 89059119
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads Part Number: 22742382
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaces: 25918342
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
View related parts
GMC Yukon Brake Pads Part Number: 19329677
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 15792633, 23112025, 25949454, 15945636
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Brake Pads Part Number: 19210705
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads; Front Pads
- Position: Rear
- Replaces: 18041762, 18026217
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Brake Pads, Front Part Number: 18048101
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Rear Pads; Front Pads; Pad Kit, Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Brake Pads Part Number: 18045936
Product Specifications
- Other Name: Pad Kit, Brake
- Position: Rear
- Replaces: 18043517, 18044202
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Brake Pads Part Number: 88964192
$111.96 MSRP: $200.82
You Save: $88.86 (45%)
Product Specifications
- Other Name: Pad Kit, Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

GMC Yukon Brake Pad

Want to cut long-term maintenance and repair costs? Choose OEM Brake Pad. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon Brake Pad includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Brake Pad is an important part of the braking system of GMC Yukon which among other things, halts the movement of the vehicle by rubbing against the brake rotors. These are made of a friction material welded onto a metal backing plate; through conversion of kinetic energy into thermal energy, the pads act to slow the vehicle. They require to be replaced periodically because of their wearing out, most vehicles have a wear facility that can check the pads' thickness to determine when they are worn out. For the years, GMC Yukon Brake Pad contain different materials, such as the non-metallic type, semi-metallic type, and ceramic type, and these types of brake pad will have their own advantage about friction materials, wearing rate, and noise generation. The clips and springs needed in this kind of brake assembly should also be changes from time time to time in order to enhance the longevity of the brake pads, as well as the general performance of the vehicle.

GMC Yukon Brake Pad Parts and Q&A

Brake Pads
19329677
Q: How to replace the rear disc brake pads on the 1500 Series on GMC Yukon?
A:
Check the brake master cylinder fluid level before starting work on the 1500 series rear disc brake pads. Drain the fluid until the level reaches halfway between minimum and maximum markings if the fluid exceeds this point. Lift and secure the vehicle while taking off the tire and wheel unit. Adjust the Brake Caliper Piston with a c-clamp over the housing toward the inboard pads until the piston fully compresses. For guide pin bolt removal keep hand tools handy when tightening an open-end wrench onto the caliper guide pin. Put heavy mechanic wire under the brake caliper to protect the hydraulic brake hose. Pull the bolt that holds the guide pin in place from the brake caliper unit. Then move the caliper upward while keeping it secure in its position. Keep the original Brake Pad positions and springs marked to install them correctly. Also put new retaining springs in each slot. Take off brake pads and retaining springs from their attachment space. Put fresh retaining springs both on the caliper mounting bracket and positions for new brake pads. Fit the brake caliper in place on the mounting bracket then put on the new mounting bolts. Secure the caliper guide pin bolt with 38 n.m torque by gripping the pin with an open end wrench. Reposition the tire and wheel, decline the vehicle, and press the Brake Pedal gently until it reaches 2/3 of its length before letting go. Continue to pump the Brake Pedal until the pedals register a strong resistance to settle the brake caliper pistons and pads. Place clean brake fluid into the brake master cylinder until it reaches the appropriate mark followed by preparing brake rotors and pads with a burnishing process.
Brake Pads
25910432
Q: How to replace the front disc brake pads on the 2500 Series on GMC Yukon?
A:
Before working on the front brake pads of the 2500 series inspect the brake master cylinder reservoir. If fluid shows above the midpoint between its highest and lowest limits drain it to the midpoint. First lift the vehicle and afterwards take off the tire and wheel components. Apply 2 large c-clamps over the caliper housing to push both brake caliper pistons inward until they are completely compressed. Secure the brake caliper with heavy mechanic wire to keep it safe during brake hose removal when taking out its guide pin bolts. Pull out the brake caliper from its bracket while keeping track of the Brake Pad wear sensor placement applied on it. Check and remove the old retaining springs from the brake caliper then study its internal components. Insert fresh Brake Pad retaining springs onto the caliper bracket before putting the new brake pads inside and placing their wear sensor correctly. Fix the brake caliper to the bracket by inserting guide pin bolts then tightening them to 108 n.m (80 lb ft). Place the wheel back on and lower the vehicle. Without starting the engine apply the brake to about two-thirds of its span before releasing. Keep applying the Brake Pedal for regular cycles until you create a strong brake feeling that lets the caliper pistons and brake pads reach their ideal position. Put clean brake fluid into the brake master cylinder reservoir until it stays at its right level. Also make sure brake pads and discs become perfectly smooth.