Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25852957
Brake Pads, Front

2005-2008 GM

Customer Questions & Expert Answers (11)
GM 25852957 Brake Pads, Front
GM 25852957 Brake Pads, Front
GM 25852957 Brake Pads, Front
  • Part Description
    Pad Kit, Front Disc Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Replaces
    89059119
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 25852957 Brake Pads, Front is Ref No. 7 in the diagram below

    2008 Chevy Silverado 1500 Brake Pads, Front Diagram for 25852957
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25852957

  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2008 Cadillac EscaladeBase, Platinum8 Cyl 6.2 L GAS
    2007 Cadillac Escalade ESVBase8 Cyl 6.2 L GAS
    2007-2008 Cadillac Escalade EXTBase8 Cyl 6.2 L GAS
    2007-2008 Chevrolet AvalancheLS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2008 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2007-2008 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2008 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25852957 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25852957 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front disc brake pads on a 2500 Series on Cadillac Escalade? Posted by Customer
    A:
    Before starting pad replacement on a 2500 series disc brake work begins by checking the brake master cylinder reservoir. If the brake fluid level sits above midpoint between maximum and minimum limits gets drained to match the midpoint. Lift the vehicle and take off the wheel and tire unit. Press down the brake caliper pistons through two large c-clamps that rest over the housing. Tighten them until they push all pistons completely back. Secure the brake caliper with heavy mechanic wire to shield the hydraulic hose as you take out its guide pin fasteners. The brake caliper needs to be taken off its bracket while keeping track of Brake Pad wear sensor placement when possible. Look for issues in the brake caliper before installing new springs for brake pads. Fix the new Brake Pad retaining springs to the caliper bracket and set the brake pads in place with wear sensor matching the instructions. Reinstall the wheel assembly and lower the vehicle while making sure the brake caliper guide pin bolts reach 108 n.m torque. When the engine is shut off apply the Brake Pedal to around 2/3 of its space and ease off the pedal slowly. Press down the Brake Pedal gradually several times until the brake performance feels strong enough to position the brake caliper pistons and pads correctly. After tightening all components you need to add clean brake fluid to the reservoir until it reaches the recommended level then perform Brake Pad and disc burnishing.
    Posted by ChevyPartsGiant Specialist
    Q:
    How many times should you repeat the brake pedal process for the 2007 Cadillac Escalade ESV? Posted by Customer
    A:
    Repeat this process until a firm pedal is achieved.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done to prevent damage to the hydraulic flexible brake hose for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Support the brake caliper with heavy mechanic wire after removing the lower brake caliper guide pin bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What tools should be used to remove the guide pin bolts for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Use hand tools only, holding the caliper guide pin with an open end wrench while loosening the guide pin bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done with the brake master cylinder reservoir after the installation for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Fill it to the correct level with clean brake fluid if necessary and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done with the master cylinder reservoir after seating the caliper pistons and pads for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Fill the master cylinder reservoir to the proper level with clean brake fluid if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the next step after reattaching the caliper for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the procedure for removing the brake pads for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the lower brake caliper bolt, rotate the caliper upwards, and take out the brake pads from the caliper bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step in the installation process for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Place new anti-rattle clips on the caliper bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done with the brake master cylinder reservoir for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Fill it to the proper level with clean brake fluid.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads, Front 25852957 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25852957 Brake Pads, Front is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25852957 Brake Pads, Front fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 25852957 maintains top performance when functioning as the Pad Kit, Front Disc Brake; Disc Brake Hardware Kit unit at its Front. The component 25852957 is constructed from durable material and its dimensions span 11.7 x 6.9 x 3.8 inches while weighing 6.00 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Pads. The part 25852957 has available replacement options 89059119. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.