What tools are required to service and repair the CV Joint Boot for the Wheel Drive Shaft Outer Joint and Seal Replacement on GMC Yukon?

Constant velocity joint boot service and repair; specifically the wheel drive shaft outer joint and seal replacement requires: snap ring pliers (J 8059), seal clamp tool (J 35910), drive axle clamp swage tool (J 36652-1), and drive axle clamp swage tool (J 36652-2). These tools are essential for bnsf railway mechanics, as they will be used to change the snap rings, seals, and drives of the vehicles, ultimately maintaining maximum efficiency of the vehicles. Start by using a hand grinder, cutting through the swage ring, and removing the small boot clamp with the use side cutters. Slide the boot down the half shaft bar and clean the CV Joint. Open the snap ring ears with the snap ring pliers (J 8059), and take out the CV Joint and the boot from the halfshaft bar, discard the old boot. Remove the chrome alloy balls from the cv joints cage also and ensure that all components are clean. Check for wear or damages and replace parts as needed. Put grease into the inner and outer race grooves, align and install the inner race in the cage to install it into the outer race. Install chrome alloy balls; pack the CV Joint boot and assembly with grease; and in order now attach the small boot clamp with seal clamp tool (J 35910) to the given torque. Make sure the CV Joint inner race retaining ring side is turned to the halfshaft bar before mounting the CV Joint over it. Finally, use the drive axle clamp swage tool (J 36652-1 or J 36652-2) to clamp the CV Joint boot on to the outer race so that it is aligned properly and clamp the CV Joint assembly in place with the bolts provided.

OEM GMC Yukon CV Joint

CV Joint Axle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 CV Joints found

View related parts
GMC Yukon C.V. Joint, Front Part Number: 26058362
$249.99 MSRP: $405.72
You Save: $155.73 (39%)
ADD TO CART
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Inner CV Joint; Outer CV Joint
- Position: Front
- Replaces: 26069243
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon C.V. Joint, Front Part Number: 26037364
$272.97 MSRP: $494.06
You Save: $221.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; CV Joint; Outer CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 26020728
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Inner CV Joint Part Number: 26037152
$125.65 MSRP: $225.39
You Save: $99.74 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CV Joints; CV Joint; Spider Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 GMC Yukon | Base, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon Inner CV Joint, Front Part Number: 87842371
$148.30 MSRP: $233.33
You Save: $85.03 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; Inner Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 84808767, 84808766, 84392109, 84392108
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Outer CV Joint Part Number: 87842369
$99.80 MSRP: $156.34
You Save: $56.54 (37%)
ADD TO CART
Product Specifications
- Other Name: Joint Kit-Front Wheel Drive Shaft CV; Joint Kit, Front Axle U Joint
- Replaces: 84392098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 GMC Yukon | AT4, Denali, Denali Ultimate, SLE, SLT | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon Inner CV Joint, Front Part Number: 84814583
$80.05 MSRP: $125.40
You Save: $45.35 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Spider Assembly; Inner Joint; Tripot Housing; Housing
- Position: Front
- Replaces: 26056763, 22928968, 15295245, 26062616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2020 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon C.V. Joint, Front Part Number: 22928970
$135.51 MSRP: $215.15
You Save: $79.64 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint Kit; CV Joint; Outer CV Joint; Outer Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 26057639, 26069245
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2020 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon C.V. Joint, Outer Part Number: 26037371
$325.46 MSRP: $589.06
You Save: $263.60 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Outer CV Joint; Outer Joint; Joint Kit, Front Axle U Joint; CV Joint
- Position: Outer
- Replaces: 26037366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
GMC Yukon C.V. Joint, Front Part Number: 26062620
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Shaft CV; CV Joint; Outer CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 GMC Yukon | Denali, SLE, SLT | 8 Cyl 5.7 L GAS
View related parts
GMC Yukon Inner CV Joint, Front Part Number: 26062617
Product Specifications
- Other Name: Spider Kit, Front Wheel Drive Axle; CV Joint; Spider Assembly
- Position: Front
- Replaced by: 15295246
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon Inner CV Joint, Front Part Number: 15295246
Product Specifications
- Other Name: Joint, Front Axle U Joint; CV Joint; Outer CV Joint; Inner Joint; Tripot Housing; Housing
- Position: Front
- Replaces: 26056765, 26062617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon C.V. Joint, Front Part Number: 26037361
Product Specifications
- Other Name: Joint Kit, Front Wheel Drive Axle; CV Joint; Joint Kit, Front Axle U Joint
- Position: Front
- Replaces: 26025715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 GMC Yukon | Base, GT, SLE, SLT, Sport | 8 Cyl 5.7 L GAS

GMC Yukon CV Joint

Want to cut long-term maintenance and repair costs? Choose OEM CV Joint. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon CV Joint includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Yukon CV Joint is among the critical parts in the unit, one that significantly affects the performance and durability of the car's parts. Having been specially developed to enable the effortless distribution of torque from the transmission to the drive wheels the CV Joint enables for smooth and effectual varied operation of Yukon's several models. Therefore, based on the type of the CV Joints, Rzeppa joints on the outboard side and tripod joints on the inboard side show that GMC Yukon is better engineered. The rubber boots that contain the CV Joints should be checked and cleaned often to reduce the risk of contamination and ensure that there shall be sufficient lubrication throughout the joints thus improving the performance as well as the safety of the vehicle. The manufacture of the full-size GMC Yukon SUV began in 1991, and due to it reliability the car has gained high demand from North America and the Middle East region. Looking through five generations of the cars, it is possible to observe GMC's constant work on the improvement of power, fuel efficiency, and stability and updated models are equipped with the latest technologies which increase performance. The role of the GMC Yukon CV Joint is substantial, as it pertains to the vehicle's functionality as well as to the safe driving experience. Due to the strong construction and universality of the GMC Yukon CV Joint for various types of Yukon, it successfully occupies its niche in the automotive world as a reflection of the brand's philosophy of reliability and constant development.

GMC Yukon CV Joint Parts Questions & Experts Answers

C.V. Joint, Front
22928970
Q: What tools are required to service and repair the CV Joint Boot for the Wheel Drive Shaft Outer Joint and Seal Replacement on GMC Yukon?
A:
Constant velocity joint boot service and repair; specifically the wheel drive shaft outer joint and seal replacement requires: snap ring pliers (J 8059), seal clamp tool (J 35910), drive axle clamp swage tool (J 36652-1), and drive axle clamp swage tool (J 36652-2). These tools are essential for bnsf railway mechanics, as they will be used to change the snap rings, seals, and drives of the vehicles, ultimately maintaining maximum efficiency of the vehicles. Start by using a hand grinder, cutting through the swage ring, and removing the small boot clamp with the use side cutters. Slide the boot down the half shaft bar and clean the CV Joint. Open the snap ring ears with the snap ring pliers (J 8059), and take out the CV Joint and the boot from the halfshaft bar, discard the old boot. Remove the chrome alloy balls from the cv joints cage also and ensure that all components are clean. Check for wear or damages and replace parts as needed. Put grease into the inner and outer race grooves, align and install the inner race in the cage to install it into the outer race. Install chrome alloy balls; pack the CV Joint boot and assembly with grease; and in order now attach the small boot clamp with seal clamp tool (J 35910) to the given torque. Make sure the CV Joint inner race retaining ring side is turned to the halfshaft bar before mounting the CV Joint over it. Finally, use the drive axle clamp swage tool (J 36652-1 or J 36652-2) to clamp the CV Joint boot on to the outer race so that it is aligned properly and clamp the CV Joint assembly in place with the bolts provided.