Make sure this part fits

GM 15295246
Inner CV Joint, Front

1995-2019 GM

Customer Questions & Expert Answers (15)
GM 15295246 Inner CV Joint, Front
  • Part Description
    Joint, Front Axle U Joint; CV Joint
  • Position
    Front
  • Replaces
    26056765, 26062617
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1998-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet C2500 SuburbanBase, LS8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet K1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15295246 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15295246 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the process for installing the chrome alloy balls for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the cage and inner race into the outer race, then use the brass drift to install the chrome alloy balls.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in the process for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Use a hand grinder to cut through the swage ring and remove the tripot housing from the halfshaft, then wipe and degrease it thoroughly before allowing it to dry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you clamp the CV joint boot over the CV joint outer race for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Slide the large diameter of the CV joint boot over the CV joint outer race and clamp it tightly using the Drive Axle Clamp Swage Tool (J36652).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in the process for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Begin by using a hand grinder to cut through the swage ring and side cutters to remove the small boot clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in the process for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Inspect the transmission sealing surface for corrosion and clean it with 320 grit cloth if necessary, using transmission fluid to remove debris.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you secure the small boot clamp for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Secure the small boot clamp using J35910, tightening it to 136 Nm and checking the gap dimension on the clamp ear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in cutting the swage ring for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Carefully use a hand grinder to cut through the swage ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the procedure for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Assemble the bolts and support plate to the base of the Drive Axle Clamp Swage Tool (J 36652-1) and secure it in a vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after clamping the CV joint seal for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the halfshaft assembly from the clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you secure the small boot clamp for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Secure the small boot clamp with J35910, a breaker bar, and a torque wrench to 136 Nm (100 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the small boot clamp for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Use side cutters to remove the small boot clamp and slide the boot down the halfshaft bar away from the CV joint outer race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the procedure for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Assemble the bolts and support plate to the base of the Drive Axle Clamp Swage Tool (J 36652-1) and secure it in a vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the next step after removing the small seal clamp for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Compress the tri-pot seal up the halfshaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove components from the halfshaft bar for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the small boot retaining clamp with side cutters and take out the spacer ring, tripot spider assembly, and tripot boot from the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inner CV Joint, Front 15295246 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15295246 Inner CV Joint, Front is available in the market under the name GM CV Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15295246 Inner CV Joint, Front fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 15295246 maintains top performance when functioning as the Joint, Front Axle U Joint; CV Joint unit at its Front. The component 15295246 is constructed from durable material and its dimensions span 7.5 x 7.4 x 4.9 inches while weighing 4.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Outer CV Joint; Inner Joint; Tripot Housing; Housing. The part 15295246 has available replacement options 26056765, 26062617. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.