Make sure this part fits

GM 26058362
C.V. Joint, Front

1999-2013 GM

Customer Questions & Expert Answers (14)
GM 26058362 C.V. Joint, Front
  • Part Description
    Joint, Front Axle U Joint; CV Joint
  • Position
    Front
  • Replaces
    26069243
  • Manufacturer
    General Motors
Make sure this part fits
$249.99 MSRP: $405.72
You Save: $155.73 (39%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2010 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26058362 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26058362 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tools are required for servicing and repairing the Constant Velocity Joint Boot for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Snap Ring Pliers (J8059), Seal Clamp Tool (J35910), and Drive Axle Clamp Swage Tool (J36652).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done to the components after disassembly for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Clean the inner and outer race assemblies, CV joint cage, and chrome alloy balls thoroughly with cleaning solvent, ensuring all old grease and contaminants are removed, then dry all parts and check for wear or damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is important to ensure when sliding the CV joint onto the halfshaft bar for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Ensure the retaining ring side of the CV joint inner race faces the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in the process for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Use a hand grinder to cut through the swage ring, then employ side cutters to remove the small boot clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the small boot clamp for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Use side cutters to remove the small boot clamp and slide the boot down the halfshaft bar away from the CV joint outer race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after all six chrome alloy balls are removed for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Pivot the cage and inner race 90 degrees to align with the outer race and lift them out.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you secure the new boot clamp for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Pack the CV joint boot and assembly with the supplied grease, then secure the new small boot clamp using the Drive Axle Seal Clamp Pliers, tightening it to 136 Nm (100 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done with the CV joint face for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Wipe grease from the CV joint face.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How should the CV joint seal and assembly be packed for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Pack the CV joint seal and assembly with the provided grease, then place the new small seal clamp onto the CV joint seal and slide it onto the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the tripot housing from the halfshaft for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Carefully use a hand grinder to cut through the swage ring, then remove the tripot housing and degrease it thoroughly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the next step after securing the small seal clamp for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Install the convolute retainer tool over the inboard joint seal, ensuring to capture the correct number of convolutions based on the model.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you clamp the CV joint boot for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Slide the large diameter of the CV joint boot over the CV joint outer race and clamp it tightly using the swage ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How should the tri-pot assembly be prepared for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Clean the tri-pot assembly roller bearings and housing, degreasing thoroughly and allowing it to dry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM C.V. Joint, Front 26058362 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26058362 C.V. Joint, Front is available in the market under the name GM CV Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26058362 C.V. Joint, Front fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 26058362 maintains top performance when functioning as the Joint, Front Axle U Joint; CV Joint unit at its Front. The component 26058362 is constructed from durable material and its dimensions span 8.7 x 6.9 x 7.1 inches while weighing 12.40 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inner CV Joint; Outer CV Joint. The part 26058362 has available replacement options 26069243. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.