Make sure this part fits

GM 26062617
Inner CV Joint, Front

1995-2007 GM

Customer Questions & Expert Answers (13)
GM 26062617 Inner CV Joint, Front
  • Part Description
    Spider Kit, Front Wheel Drive Axle; CV Joint
  • Position
    Front
  • Replaced By
    15295246
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26062617
    Part DescriptionSpider Kit, Front Wheel Drive Axle; CV Joint
    Other NamesSpider Assembly
    Item Dimensions7.5 x 7.1 x 5.0 inches
    Item Weight4.10 Pounds
    PositionFront
    ConditionNew
    ManufacturerGeneral Motors
    SKU26062617
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2005 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2005 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1998-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1995-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet C2500 SuburbanBase, LS8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1995-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1998-1999 Chevrolet K1500Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26062617 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26062617 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How is the new small seal clamp installed for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Place the new small seal clamp onto the joint seal, compress it onto the halfshaft bar, and secure it with the Seal Clamp Tool (J35910) to a torque of 136 Nm (100 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should you do with the snap ring for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Locate the halfshaft bar retaining snap ring in the inner race and spread the snap ring ears apart using the Snap Ring Pliers (J 8059).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What tools are required for servicing and repairing the Constant Velocity Joint Boot for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    The required tools are Snap Ring Pliers (J 8059), Seal Clamp Tool (J 35910), Drive Axle Clamp Swage Tool (J 36652-1), and Drive Axle Clamp Swage Tool (J 36652-2).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What tools are needed to service and repair the Constant Velocity Joint Boot for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Snap Ring Pliers (J8059), Seal Clamp Tool (J35910), and Drive Axle Clamp Swage Tool (J36652).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the procedure for installing the new swage ring for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Distort the new swage ring into an oval shape and slide it over the boot, ensuring the retaining ring side of the CV joint inner race faces the halfshaft bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you use the J36652 tool for clamping for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Mount J36652 in a vise, install the bottom half of the split-plate swage clamp, and position the CV joint end of the halfshaft assembly in the tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done after cleaning all grease from the CV joint face for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Locate the halfshaft bar retaining snap ring in the inner race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the small seal clamp for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Cut off the small seal clamp with side cutters and slide the seal down the halfshaft bar away from the CV joint outer race.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the final step in the process for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Loosen the bolts and remove the halfshaft assembly from Split Plate Swage Clamp (J 36652) and take off the convolute retainer tool from the seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What is the first step in removing the old seal for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Use a hand grinder to cut through the swage ring and side cutters to remove the small seal clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    What should be done with the tripot spider assembly for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Install the tripot spider assembly and spacer ring, pack the tripot seal and housing with the supplied grease, and assemble the tripot housing and seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    Q:
    How do you remove the small seal clamp for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Use side cutters to remove the small seal clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 26062617, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 26062617 Inner CV Joint, Front. It is sometimes referred to as GM CV Joint. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 26062617 Inner CV Joint, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery