Other Name: Rod Assembly, Steering Linkage Relay; Drag Link Repair Kit; Steering Center Link; Drag Link; Center Link Assembly; Rod, Steering Connecting
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-2000 GMC Yukon | Base, Denali, GT, SL, SLE, SLT, Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
| Page 1 of 2 |Next >
1-20 of 22 Results
GMC Yukon Tie Rod
Our website offers an extensive catalog of genuine GMC Yukon Tie Rod at unbeatable prices. Every OEM GMC Yukon Tie Rod comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Yukon Tie Rod Parts Questions & Experts Answers
Q: How to Address Tie Rod Issues in the Steering Linkage on GMC Yukon?
A: The first step to replace a steering linkage inner Tie Rod consists of removing the steering gear boot and checking the Tie Rod for damage or contaminants. A replacement steering gear should be installed if either issue is detected. Changing the steering gear preload adjustment before moving the inner Tie Rod poses the risk of harming both pinion and steering gear. A pipe wrench should be used against the inner Tie Rod housing of the steering gear at its valve end to protect the equipment from damage. Position a pipe wrench onto the flats of the steering gear rack which is next to the steering linkage inner Tie Rod while using another wrench on the flats of the steering linkage inner Tie Rod to rotate it counterclockwise when holding the steering gear rack steady until it detaches from the steering gear rack . Clean all threads before applying loctite(R)262 to the steering gear inner Tie Rod threads and then connect the steering linkage inner Tie Rod to the steering gear rack. A pipe wrench should fasten the flats of the steering gear rack while tightening the steering linkage inner Tie Rod to 150 nm (111 lb ft). Steering gear boot should be installed as the final step.