How to replace the Air Bag Clockspring in the Steering Wheel on GMC Yukon XL 2500?

First prepare the new inflatable restraint Steering Wheel module air bag clock spring installation by ensuring the wheels face forward in a straight position with the steering column in lock using the steering column anti rotation pin (J 42640) for alignment. The first step should be to turn off the sir system function. To begin the installation remove the Steering Wheel from its shaft followed by pulling the tilt lever directly if available. First disconnect both torx(R) head screws securing the lower trim before you detach the upper trim cover through its two torx(R) head screws. Start by unlinking the wire harness straps from the Steering Wheel column harness then discard the retaining ring and air bag clock spring. Throw away the original air bag clock spring when making a replacement. Install the new air bag clock spring assembly so it aligns directly with the horn tower found on the turn signal cancel cam assembly. Use the slider to position the air bag clock spring on the Steering Shaft assembly before seating the retaining ring securely in its designated groove. Install the upper trim cover after removing the centering tab from the new air bag clock spring by using 2 torx(R) head screws with torque set to 1.5 n.m (13 lb in). The lower trim cover should follow with its respective 2 torx(R) head screws tightened to 1.5 n.m (13 lb in) then ensure tab engagement. Organize the installation process as follows: tilt lever (if applicable) followed by the Steering Wheel onto the Steering Shaft then activate the sir system.

OEM GMC Yukon XL 2500 Air Bag Clockspring

Steering Wheel Airbag Coil

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Air Bag Clocksprings found

View related parts
GMC Yukon XL 2500 Clockspring
Part Number: 25966964
$215.75 MSRP: $322.50
You Save: $106.75 (34%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Inflatable Restraint Steering Wheel Module (W/Accessory; Air Bag Clockspring; Coil, Inflatable Restraint System
- Replaces: 15829093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Clockspring
Part Number: 25966963
$191.19 MSRP: $285.79
You Save: $94.60 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Inflatable Restraint Steering Wheel Module (W/Accessory; Air Bag Clockspring; Coil, Inflatable Restraint System
- Replaces: 15829094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 2500 Clockspring
Part Number: 19330850
$136.88 MSRP: $204.60
You Save: $67.72 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint System; Air Bag Clockspring
- Replaces: 26087306
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2002 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Clockspring
Part Number: 26094620
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Clockspring
Part Number: 19330023
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint System; Air Bag Clockspring
- Replaces: 26087300
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Clockspring
Part Number: 26101829
$303.56 MSRP: $453.74
You Save: $150.18 (34%)
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Replaces: 26103604
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
GMC Yukon XL 2500 Clockspring
Part Number: 26101826
$321.60 MSRP: $480.81
You Save: $159.21 (34%)
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil Kit, Inflatable Restraint System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 GMC Yukon XL 2500 | SLE, SLT | 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

GMC Yukon XL 2500 Air Bag Clockspring

Our website offers an extensive catalog of genuine GMC Yukon XL 2500 Air Bag Clockspring at unbeatable prices. Every OEM GMC Yukon XL 2500 Air Bag Clockspring comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Yukon XL 2500 Air Bag Clockspring Parts Questions & Experts Answers

Clockspring
26101829
Q: How to replace the Air Bag Clockspring in the Steering Wheel on GMC Yukon XL 2500?
A: First prepare the new inflatable restraint Steering Wheel module air bag clock spring installation by ensuring the wheels face forward in a straight position with the steering column in lock using the steering column anti rotation pin (J 42640) for alignment. The first step should be to turn off the sir system function. To begin the installation remove the Steering Wheel from its shaft followed by pulling the tilt lever directly if available. First disconnect both torx(R) head screws securing the lower trim before you detach the upper trim cover through its two torx(R) head screws. Start by unlinking the wire harness straps from the Steering Wheel column harness then discard the retaining ring and air bag clock spring. Throw away the original air bag clock spring when making a replacement. Install the new air bag clock spring assembly so it aligns directly with the horn tower found on the turn signal cancel cam assembly. Use the slider to position the air bag clock spring on the Steering Shaft assembly before seating the retaining ring securely in its designated groove. Install the upper trim cover after removing the centering tab from the new air bag clock spring by using 2 torx(R) head screws with torque set to 1.5 n.m (13 lb in). The lower trim cover should follow with its respective 2 torx(R) head screws tightened to 1.5 n.m (13 lb in) then ensure tab engagement. Organize the installation process as follows: tilt lever (if applicable) followed by the Steering Wheel onto the Steering Shaft then activate the sir system.