Make sure this part fits

GM 26041014
Pitman Arm

1984-2005 GM

Customer Questions & Expert Answers (10)
GM 26041014 Pitman Arm
  • Part Description
    Arm Kit, Pitman; Idler Arm
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1985-2003 Chevrolet S10Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR54 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1984-1994 Chevrolet S10 BlazerBase, High Country, LT, Sport, Tahoe, Tahoe LT4 Cyl 1.9 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1992-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1984-1990 GMC S15Base, EL, Gypsy, High Sierra, Sierra Classic4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1984-1991 GMC S15 JimmyBase, Gypsy, High Sierra, Sierra Classic, SLE, SLS, SLT, Timberline4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991-2003 GMC SonomaBase, GT, SL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
    1991 GMC SycloneBase6 Cyl 4.3 L GAS
    1992-1993 GMC TyphoonBase6 Cyl 4.3 L GAS
    1996-2004, 1991-1994 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26041014 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26041014 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Lower the vehicle and adjust the front toe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What should be inspected after disconnecting the pitman arm for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Inspect the ball stud threads for damage and the ball stud seals for excessive wear, then clean the threads on the ball stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What is the final step after installing the pitman arm for the 2002 Chevrolet S10? Posted by Customer
    A:
    Remove the power steering gear from the vise and reinstall it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    How is the new idler arm installed for the 2002 Chevrolet S10? Posted by Customer
    A:
    Position the new idler arm on the frame and install the idler arm mounting bolts and nuts, tightening them to 108 Nm (79 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What should be inspected after removing the pitman arm for the 2000 GMC Jimmy? Posted by Customer
    A:
    Inspect the ball stud threads for damage and the ball stud seals for excessive wear, then clean the threads on the ball stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    How do you reconnect the relay rod to the idler arm for the 2000 GMC Jimmy? Posted by Customer
    A:
    Reconnect the relay rod to the idler arm ball stud, ensuring the seal is in place, and seat the taper using either the Steering Linkage Installer (112 mm) (J 29193) or the Steering Linkage Installer (114 mm) (J 29194), tightening to 54 Nm (40 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What is the first step in the process for the 2001 GMC Jimmy? Posted by Customer
    A:
    Begin by removing the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What is the final step in the process for the 2001 GMC Jimmy? Posted by Customer
    A:
    Reinstall the differential carrier shield and its mounting bolts, tightening them to 25 Nm (19 ft. lbs.), followed by the steering linkage shield, then lower the vehicle and adjust the front toe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    How is the new idler arm installed for the 2003 GMC Sonoma? Posted by Customer
    A:
    Position the new idler arm on the frame and install the idler arm mounting bolts and nuts, tightening them to 108 Nm (79 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pitman Arm 26041014 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26041014 Pitman Arm is available in the market under the name GM Idler Arm, Pitman Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26041014 Pitman Arm fits certain Chevrolet S10, Blazer, S10 Blazer models, as well as GMC Sonoma, Typhoon, Syclone. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 26041014 maintains top performance when functioning as the Arm Kit, Pitman; Idler Arm unit. The component 26041014 is constructed from durable material and its dimensions span 10.4 x 4.3 x 1.9 inches while weighing 2.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Arm Kit, Steering Pitman. The part 26041014 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.