How to Properly Maintain and Fix the Idler Arm on GMC Jimmy?

Vehicle service and Idler Arm repair starts by raising the vehicle through the use of safety stands. First disconnect the mounting bolts securing both the steering linkage shield and differential carrier shield. Begin the Idler Arm service by taking out the frame-mounted bolts and nuts using a correct tool for Ball Joint separation. Make use of the steering linkage and tie rod puller (J 24319-B) to separate the relay rod from the Idler Arm before you take off the Idler Arm. Thoroughly check the ball stud thread along with its seal for damage before cleansing the ball stud threads and nut. Attach the Idler Arm to the frame before installing its mounting bolts and nuts which need to be tightened to 79 ft. Lbs. (108 Nm). The ball stud of the Idler Arm should be connected to the relay rod with proper seal positioning while using the steering linkage installer (12 mm) (J 29193) or the steering linkage installer (14 mm) (J 29194) for taper seating that requires a 54 nm (40 ft. Lbs.) torque. Use the steering linkage installer to remove the ball stud nut before you can install a fresh nut on the Idler Arm ball stud where you should set the torque to 60 ft. Lbs. Return the differential carrier shield along with its mounting bolts to their position and tighten the bolts to 25 nm (19 ft. Lbs.). Then install the steering linkage shield. Proceed by lowering the vehicle then undertake front wheel toe adjustment.

OEM GMC Jimmy Idler Arm

Steering Idler Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Idler Arms found

View related parts
GMC Jimmy Idler Arm
Part Number: 19461033
$84.32 MSRP: $150.58
You Save: $66.26 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Steering Linkage Idler
- Replaces: 14002551, 88911335
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 GMC Jimmy | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Idler Arm
Part Number: 26054932
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Steering Idler Arm; Pitman Arm; Arm Kit, Steering Idler
- Replaces: 26033093, 31022859
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Idler Arm
Part Number: 26059504
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Pitman Arm; Arm Kit, Steering Idler
- Replaces: 14067696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 GMC Jimmy | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Pitman Arm
Part Number: 14013039
Product Specifications
- Other Name: Arm, Steering Pitman; Steering Pitman Arm; Idler Arm; Arm Assembly, Steering Pitman
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 GMC Jimmy | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Pitman Arm
Part Number: 14013038
Product Specifications
- Other Name: Arm Assembly, Steering Pitman; Steering Pitman Arm; Idler Arm; Arm, Steering Pitman
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 GMC Jimmy | Base | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
GMC Jimmy Pitman Arm
Part Number: 26054968
Product Specifications
- Other Name: Arm Kit, Pitman; Steering Pitman Arm; Idler Arm; Arm Kit, Steering Pitman
- Replaces: 26033087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Pitman Arm
Part Number: 26041014
Product Specifications
- Other Name: Arm Kit, Pitman; Idler Arm; Arm Kit, Steering Pitman
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Idler Arm
Part Number: 26041013
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Pitman Arm; Arm Assembly, Steering Idler; Arm Kit, Steering Idler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2001 GMC Jimmy | Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Pitman Arm
Part Number: 14064660
Product Specifications
- Other Name: Arm, Pitman; Idler Arm; Arm, Steering Pitman
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL

GMC Jimmy Idler Arm

Our website offers an extensive catalog of genuine GMC Jimmy Idler Arm at unbeatable prices. Every OEM GMC Jimmy Idler Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Jimmy Idler Arm Parts Questions & Experts Answers

Idler Arm
26054932
Q: How to Properly Maintain and Fix the Idler Arm on GMC Jimmy?
A: Vehicle service and Idler Arm repair starts by raising the vehicle through the use of safety stands. First disconnect the mounting bolts securing both the steering linkage shield and differential carrier shield. Begin the Idler Arm service by taking out the frame-mounted bolts and nuts using a correct tool for Ball Joint separation. Make use of the steering linkage and tie rod puller (J 24319-B) to separate the relay rod from the Idler Arm before you take off the Idler Arm. Thoroughly check the ball stud thread along with its seal for damage before cleansing the ball stud threads and nut. Attach the Idler Arm to the frame before installing its mounting bolts and nuts which need to be tightened to 79 ft. Lbs. (108 Nm). The ball stud of the Idler Arm should be connected to the relay rod with proper seal positioning while using the steering linkage installer (12 mm) (J 29193) or the steering linkage installer (14 mm) (J 29194) for taper seating that requires a 54 nm (40 ft. Lbs.) torque. Use the steering linkage installer to remove the ball stud nut before you can install a fresh nut on the Idler Arm ball stud where you should set the torque to 60 ft. Lbs. Return the differential carrier shield along with its mounting bolts to their position and tighten the bolts to 25 nm (19 ft. Lbs.). Then install the steering linkage shield. Proceed by lowering the vehicle then undertake front wheel toe adjustment.

Related GMC Jimmy Parts

Browse GMC Jimmy Idler Arm by Years

2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984