Make sure this part fits

GM 26041013
Idler Arm

1984-2005 GM

Customer Questions & Expert Answers (10)
GM 26041013 Idler Arm
  • Part Description
    Arm Kit, Steering Linkage Idler; Pitman Arm
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1991-1996 Buick Commercial ChassisBase8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1984-1989 Buick ElectraEstate Wagon, Limited, Park Avenue6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1990 Buick LeSabreCollector's Edition, Custom, Estate Wagon, Limited6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1987 Buick RegalBase, GNX, Grand National, Limited, T-Type6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1991-1996 Buick RoadmasterBase, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1987-1992 Cadillac BroughamBase, d'Elegance8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1984-1987 Cadillac DeVilleBase, Cabriolet, d'Elegance, Touring8 Cyl 4.1 L GAS, 8 Cyl 5.7 L DIESEL
    1993-1996, 1984-1986 Cadillac FleetwoodBase, Brougham, Brougham d'Elegance, Formal8 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1984-1996 Chevrolet CapriceBase, Classic, Classic Brougham, Classic LS, Classic LS Brougham, Classic LTZ6 Cyl 3.8 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL, 8 Cyl 5.7 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26041013 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26041013 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the idler arm for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the idler arm mounting bolts and nuts from the frame, ensuring to use the proper tool to separate all ball joints.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What should be done after securing the power steering gear for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Take off the pitman arm nut and washer from the pitman arm shaft, ensuring not to hammer on the pitman arm, pitman arm shaft, or puller to avoid damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What should be inspected after disconnecting the pitman arm for the 2002 Chevrolet S10? Posted by Customer
    A:
    Inspect the ball stud threads for damage and the ball stud seals for excessive wear, then clean the threads on the ball stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What is the next step after installing the new idler arm for the 2002 Chevrolet S10? Posted by Customer
    A:
    Reconnect the relay rod to the idler arm ball stud, ensuring the seal is in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What should be removed after raising for the 2000 GMC Jimmy? Posted by Customer
    A:
    The steering linkage shield and the differential carrier shield by taking out the mounting bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What is the installation process for the idler arm for the 2001 GMC Jimmy? Posted by Customer
    A:
    Position the idler arm on the frame and install the mounting bolts and nuts, tightening them to 108 Nm (79 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    Q:
    What is the installation process for the pitman arm for the 2000 GMC Jimmy? Posted by Customer
    A:
    Attach the pitman arm to the pitman arm shaft, followed by the pitman arm washer and nut, tightening the nut to 250 Nm (185 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What should be done after removing the power steering gear for the 2001 GMC Jimmy? Posted by Customer
    A:
    Install the power steering gear into a vise.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Pitman Arm
    Q:
    What should be done after seating the taper for the 2003 GMC Sonoma? Posted by Customer
    A:
    Remove the installer from the idler arm ball stud, install a new nut, and tighten it to 82 Nm (60 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Idler Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Idler Arm 26041013 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26041013 Idler Arm is available in the market under the name GM Idler Arm, Pitman Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26041013 Idler Arm fits certain Chevrolet S10, Impala, Caprice models, as well as GMC Sonoma, Typhoon, Syclone. Additionally, it is compatible with Cadillac DeVille, Fleetwood, Brougham and Buick Regal, LeSabre, Roadmaster models.
The original GM component designated by manufacturer part number 26041013 maintains top performance when functioning as the Arm Kit, Steering Linkage Idler; Pitman Arm unit. The component 26041013 is constructed from durable material and its dimensions span 13.5 x 4.3 x 4.4 inches while weighing 3.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Arm Assembly, Steering Idler; Arm Kit, Steering Idler. The part 26041013 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.