How to replace the idler arm on a 4WD on Chevrolet Blazer?

Safety stands are essential for vehicle support before starting replacement of the 4wd Idler Arm. Start by taking out the steering linkage shield before detaching both bolts from the differential carrier shield mounting and finally removing the shield. Secondly separate the Idler Arm mounting bolts and nuts from the frame using proper tools to break all ball joints. The steering linkage and tie rod puller (J 24319-B) helps disconnect the relay rod from the Idler Arm before you can take out the arm. Check if the ball stud threads and seal have any signs of damage then clean the threaded ball stud along with the ball stud nut threads. Place the new Idler Arm onto the frame before installing its mounting bolts and nuts which need to be tightened to 108 nm (79 ft. Lbs.). The ball stud installation requires a new nut fitted to the ball stud after reattaching the relay rod to the Idler Arm ball stud. Tighten this nut to 82 nm (60 ft. Lbs.). The reinstallation process begins with differential carrier shield installation and its mounting bolts should be tightened to 25 nm (19 ft. Lbs.) then steer the linkage shield. Complete the procedure by lowering the vehicle then adjusting the front toe.

OEM Chevrolet Blazer Idler Arm

Steering Idler Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Idler Arms found

View related parts
Chevrolet Blazer Pitman Arm
Part Number: 26051896
$103.77 MSRP: $142.06
You Save: $38.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Pitman; Steering Pitman Arm; Idler Arm; Arm Kit, Steering Pitman; Arm, Steering Pitman
- Replaces: 26032996
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Idler Arm
Part Number: 26054932
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Steering Idler Arm; Pitman Arm; Arm Kit, Steering Idler
- Replaces: 26033093, 31022859
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Idler Arm
Part Number: 26059030
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Steering Idler Arm; Pitman Arm; Idler Arm Assembly; Arm Kit, Steering Idler
- Replaces: 26028525
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Pitman Arm
Part Number: 26054968
Product Specifications
- Other Name: Arm Kit, Pitman; Steering Pitman Arm; Idler Arm; Arm Kit, Steering Pitman
- Replaces: 26033087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Pitman Arm
Part Number: 26041014
Product Specifications
- Other Name: Arm Kit, Pitman; Idler Arm; Arm Kit, Steering Pitman
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Idler Arm
Part Number: 26041013
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Pitman Arm; Arm Assembly, Steering Idler; Arm Kit, Steering Idler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Idler Arm
Part Number: 26016461
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Steering Idler Arm; Pitman Arm; Idler Arm Assembly; Arm Kit, Steering Idler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Chevrolet Blazer | Cheyenne, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Pitman Arm
Part Number: 14064660
Product Specifications
- Other Name: Arm, Pitman; Idler Arm; Arm, Steering Pitman
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL

Chevrolet Blazer Idler Arm

Our website offers an extensive catalog of genuine Chevrolet Blazer Idler Arm at unbeatable prices. Every OEM Chevrolet Blazer Idler Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer Idler Arm Parts Questions & Experts Answers

Idler Arm
26054932
Q: How to replace the idler arm on a 4WD on Chevrolet Blazer?
A: Safety stands are essential for vehicle support before starting replacement of the 4wd Idler Arm. Start by taking out the steering linkage shield before detaching both bolts from the differential carrier shield mounting and finally removing the shield. Secondly separate the Idler Arm mounting bolts and nuts from the frame using proper tools to break all Ball Joints. The steering linkage and tie rod puller (J 24319-B) helps disconnect the relay rod from the Idler Arm before you can take out the arm. Check if the ball stud threads and seal have any signs of damage then clean the threaded ball stud along with the ball stud nut threads. Place the new Idler Arm onto the frame before installing its mounting bolts and nuts which need to be tightened to 108 nm (79 ft. Lbs.). The ball stud installation requires a new nut fitted to the ball stud after reattaching the relay rod to the Idler Arm ball stud. Tighten this nut to 82 nm (60 ft. Lbs.). The reinstallation process begins with differential carrier shield installation and its mounting bolts should be tightened to 25 nm (19 ft. Lbs.) then steer the linkage shield. Complete the procedure by lowering the vehicle then adjusting the front toe.

Related Chevrolet Blazer Parts

Browse Chevrolet Blazer Idler Arm by Years

2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987