Make sure this part fits

GM 19419750
Buckle End

2001-2007 GM

Customer Questions & Expert Answers (17)
GM 19419750 Buckle End
  • Part Description
    Belt Kit, Driver Seat (Buckle Side) *Neutral
  • Replaces
    88957874
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19419750 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19419750 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How can you verify the correct installation of a seat belt for the 2003 Cadillac Escalade? Posted by Customer
    A:
    By inserting the seat belt latch into the buckle and ensuring it is fully seated and retained until intentionally released.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What components need to be removed to access the seat belt retractor and anchor for the 2003 Cadillac Escalade? Posted by Customer
    A:
    The nut from the seat belt retractor and the bolt from the seat belt anchor need to be removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    Which seat belt systems need to be replaced for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Systems used for adult passengers, child restraints, infant carriers, booster seats, LATCH system, and top tether anchorages.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be checked after installation for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Ensure that the seat belt latch is fully seated in the buckle and retained until purposely released.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What condition of seat belt components necessitates replacement for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Any torn, worn, or damaged components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    When must a seat belt system be replaced after a collision for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Any seat belt system that was in use during a collision serious enough to deploy automatic restraint devices, such as air bags and seat belt pretensioners, must be replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the next step after installing the seat belt buckle assembly for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the seat belt latch assembly to the center front seat and secure it by installing the seat belt latch bolt, also tightening it to 53 N.m (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What components should be replaced when replacing a seat belt system for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    The entire seat belt system should be replaced, including the buckle, guide, retractor assembly, latch, and webbing material, rather than individual components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done if a seat belt system has torn, worn, or damaged components for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    It should be replaced, including adult seat belts, built-in child restraints, and LATCH system components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after installing the bolt to the seat belt anchor for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the nut to the seat belt retractor and tighten it to 52 N.m (38 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step in the replacement process for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the seat belt guide cover, the rear seat armrest, and release the J-Clip from under the center armrest.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be ensured before replacing the center front seat belt for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Only the specified seat belt components from the GM parts catalog should be used to prevent personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What components need to be removed to begin the replacement process for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the seat belt guide cover, the rear seat armrest, and release the J-Clip from under the center armrest.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What must be done to seat belt systems involved in serious collisions for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    They must be replaced if the collision was serious enough to deploy automatic restraint devices.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the final step in the installation process for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the J-Clip under the center armrest, the rear seat armrest, and finally, the seat belt guide cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be ensured before replacing the center front seat belt for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Only the specified seat belt components from the GM parts catalog should be used to prevent personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Buckle End 19419750 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19419750 Buckle End is available in the market under the name GM Seat Belt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19419750 Buckle End fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19419750 maintains top performance when functioning as the Belt Kit, Driver Seat (Buckle Side) *Neutral unit. The component 19419750 is constructed from durable material. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Belt Kit, A95 - Front Bucket Seat; An3 - Front Bucket Seat; Ae7 - Front Split Bench. The part 19419750 has available replacement options 88957874. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.