Make sure this part fits

GM 15855657
Inner Boot, Rear

2007-2017 GM

Customer Questions & Expert Answers (11)
GM 15855657 Inner Boot, Rear
  • Part Description
    Boot Kit, Rear Axle Universal Joint; CV Boot
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$110.38 MSRP: $175.24
You Save: $64.86 (38%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15855657
    Part DescriptionBoot Kit, Rear Axle Universal Joint; CV Boot
    Other NamesBoots
    Item Dimensions11.7 x 4.9 x 4.8 inches
    Item Weight1.20 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15855657
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2017, 2008-2011 Buick EnclaveConvenience, CX, CXL, Leather, Premium6 Cyl 3.6 L GAS
    2009-2011 Chevrolet TraverseLS, LT, LTZ6 Cyl 3.6 L GAS
    2007-2011 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2007-2010 Saturn OutlookXE, XR6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15855657 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15855657 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the wheel drive shaft for the 2009 Buick Enclave? Posted by Customer
    A:
    Next, take off the outer CV joint and boot, ensuring not to cut through the inboard or outboard boot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the small seal retaining clamp be secured for the 2008 Buick Enclave? Posted by Customer
    A:
    Using the Drive Shaft Seal Clamp Pliers (J 42572), crimp the small seal retaining clamp to a torque of 136 N.m (100 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you detach the CV joint from the wheel drive shaft for the 2010 Buick Enclave? Posted by Customer
    A:
    Use a hammer and a block of wood to detach the CV joint from the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you install the inner tripot retaining ring for the 2010 Buick Enclave? Posted by Customer
    A:
    Use the appropriate tool to install the inner tripot retaining ring if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should you do if the shaft has an ear type boot clamp for the 2010 Buick Enclave? Posted by Customer
    A:
    Remove the outer boot clamp and inner boot clamp before taking off the CV joint boot from the CV joint housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should be done after removing the outer tripot spider for the 2009 GMC Acadia? Posted by Customer
    A:
    Take out the tripot spider and, if equipped, remove the inner tripot retaining ring from the wheel drive shaft, followed by the wheel drive shaft boot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How do you remove the outer tripot spider retaining ring for the 2010 GMC Acadia? Posted by Customer
    A:
    Use the appropriate tool to remove the outer tripot spider retaining ring from the wheel drive shaft, then remove the tripot spider.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the final step after closing the boot clamp for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Move the CV joint in a circular motion 4 to 5 times to distribute the lubricant, remove the wheel drive shaft from the vise, and reinstall the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the tripot spider be aligned during reassembly for the 2008 GMC Acadia? Posted by Customer
    A:
    Align the reference mark on the tripot spider with the wheel drive shaft bar, ensuring the beveled edge faces the bar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What tool is used to remove the retaining ring from the wheel drive shaft for the 2009 GMC Acadia? Posted by Customer
    A:
    Utilize the J 8059 - snap ring pliers to remove the retaining ring from the wheel drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15855657, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15855657 Inner Boot, Rear. It is sometimes referred to as GM CV Boot. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15855657 Inner Boot, Rear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery