Make sure this part fits

GM 12565169
Exhaust Camshaft

2003-2011 GM

Customer Questions & Expert Answers (14)
GM 12565169 Exhaust Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Buick LucerneCXL, CXS8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2003-2005 Cadillac DeVilleBase, DHS, Protection Series8 Cyl 4.6 L GAS
    2003-2004 Cadillac SevilleSLS8 Cyl 4.6 L GAS
    2003 Oldsmobile AuroraBase8 Cyl 4.0 L GAS
    2004-2005 Pontiac BonnevilleGXP8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12565169 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12565169 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What lubricant should be applied during installation for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Apply lubricant GM P/N 12345001 or equivalent to the roller pivot pocket and valve slot areas of the camshaft followers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    When should the camshaft intermediate drive shaft be removed for the 2010 Cadillac DTS? Posted by Customer
    A:
    The camshaft intermediate drive shaft should only be removed if wear is evident.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done before installation for the 2007 Cadillac DTS? Posted by Customer
    A:
    Clean and inspect the camshaft intermediate drive shaft before proceeding with installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the routing process for the secondary drive chain for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Route the secondary drive chain for the LH cylinder head over the inner row of intermediate shaft teeth, ensuring the RE camshaft sprocket contains the camshaft position sensor pick-up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step in the process for the 2008 Cadillac DTS? Posted by Customer
    A:
    Finally, install the camshaft intermediate drive shaft sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step after installing the camshaft intermediate drive shaft for the 2006 Cadillac DTS? Posted by Customer
    A:
    Finally, install the camshaft intermediate drive shaft sprocket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to set the camshaft timing for the 2006 Cadillac DTS? Posted by Customer
    A:
    Begin by removing the left camshaft cover, right camshaft cover, engine front cover, and the three chain tensioners, ensuring they are fully retracted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the camshaft intermediate drive shaft for the 2009 Cadillac DTS? Posted by Customer
    A:
    Clean and inspect the camshaft intermediate drive shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after removing the camshaft bearing caps for the 2007 Cadillac DTS? Posted by Customer
    A:
    Remove the Camshaft Holding Tool (J 44212) before taking out the camshafts and camshaft followers.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the procedure for routing the secondary drive chain for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Route the secondary drive chain for the LH cylinder head over the inner row of intermediate shaft teeth, ensuring the RE camshaft sprocket contains the camshaft position sensor pick-up.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after removing the sprocket for the 2003 Cadillac Seville? Posted by Customer
    A:
    Next, take out the camshaft intermediate drive shaft retaining bolts and then remove the camshaft intermediate drive shaft from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done to the camshafts before installation for the 2004 Cadillac Seville? Posted by Customer
    A:
    Clean and inspect the camshafts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you lock the crankshaft in position for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Use the Flywheel Holder (J 44214) to lock the crankshaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Exhaust Camshaft 12565169 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12565169 Exhaust Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12565169 Exhaust Camshaft fits certain Cadillac DTS, DeVille, Seville models, as well as Buick Lucerne. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 12565169 maintains top performance when functioning as the Camshaft, Engine unit. The component 12565169 is constructed from durable material and its dimensions span 28.4 x 3.4 x 3.4 inches while weighing 5.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Camshaft. The part 12565169 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.