Make sure this part fits

GM 12565166
Camshaft

2003-2011 GM

Customer Questions & Expert Answers (14)
GM 12565166 Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Buick LucerneCXL, CXS8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2003-2005 Cadillac DeVilleBase, DHS, Protection Series8 Cyl 4.6 L GAS
    2003-2004 Cadillac SevilleSLS8 Cyl 4.6 L GAS
    2004-2005 Pontiac BonnevilleGXP8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12565166 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12565166 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you position the crankshaft for camshaft timing for the 2006 Cadillac DTS? Posted by Customer
    A:
    Use the Crankshaft Rotation Socket (J39946) to rotate the crankshaft until the sprocket drive key is at approximately the 1 o'clock position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the camshaft intermediate drive shaft for the 2008 Cadillac DTS? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, ensuring the bolt holes are aligned.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    When should the camshaft intermediate drive shaft be removed for the 2010 Cadillac DTS? Posted by Customer
    A:
    The camshaft intermediate drive shaft should only be removed if wear is evident.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft intermediate drive shaft for the 2007 Cadillac DTS? Posted by Customer
    A:
    First, remove the camshaft intermediate drive shaft sprocket, ensuring that the drive shaft is only removed if wear is evident.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done with the retainer bolts for the camshaft sprockets for the 2005 Cadillac DeVille? Posted by Customer
    A:
    Loosely install the retainer bolts for both the exhaust and intake camshaft sprockets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you release valve spring pressure for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Slide the intake and exhaust camshaft onto the pins of the J 44213, then alternately loosen the camshaft bearing cap bolts until all valve spring pressure is released.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    When should the camshaft intermediate drive shaft be removed for the 2009 Cadillac DTS? Posted by Customer
    A:
    The camshaft intermediate drive shaft should only be removed if wear is evident.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the camshaft intermediate drive shaft for the 2003 Cadillac Seville? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, aligning the bolt holes, and install the retaining bolts, tightening them to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after installing the primary camshaft drive chain tensioner for the 2003 Cadillac DeVille? Posted by Customer
    A:
    Tighten its bolts to 25 Nm (18 ft. lbs.) and ensure the timing marks are aligned vertically.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you engage the crankshaft key in the sprocket for the 2004 Cadillac DeVille? Posted by Customer
    A:
    Place the crank and intermediate sprocket assembly over their respective shafts and rotate the crankshaft as necessary to engage the crankshaft key in the sprocket without altering the timing marks' relationship.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the camshaft sprockets for the 2004 Cadillac Seville? Posted by Customer
    A:
    Install the intake and exhaust camshaft sprockets, aligning them with the paint marks made during disassembly, and use an open wrench to prevent rotation while tightening the camshaft sprocket bolts to 120 Nm (89 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you install the camshaft intermediate drive shaft for the 2006 Cadillac DTS? Posted by Customer
    A:
    Position the camshaft intermediate drive shaft to the engine, aligning the bolt holes, and install the retaining bolts, tightening them to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you release valve spring pressure for the 2007 Cadillac DTS? Posted by Customer
    A:
    Loosen the camshaft bearing cap bolts alternately until all valve spring pressure is released.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft 12565166 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12565166 Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12565166 Camshaft fits certain Cadillac DTS, DeVille, Seville models, as well as Buick Lucerne. Additionally, it is compatible with Pontiac Bonneville models.
The original GM component designated by manufacturer part number 12565166 maintains top performance when functioning as the Camshaft, Engine unit. The component 12565166 is constructed from durable material and its dimensions span 27.6 x 3.4 x 3.4 inches while weighing 5.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12565166 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.