Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 89019185
Coil Assembly

1988-2005 GM

Customer Questions & Expert Answers (6)
GM 89019185 Coil Assembly
GM 89019185 Coil Assembly
GM 89019185 Coil Assembly
GM 89019185 Coil Assembly
GM 89019185 Coil Assembly
  • Part Description
    Coil Assembly, A/C Clutch; A/C Compressor Clutch
  • Replaces
    06552422, 6552422
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 89019185 Coil Assembly is Ref No. 24 in the diagram below

    1998 Chevy Lumina Coil Assembly Diagram for 89019185
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 89019185

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89019185
    Part DescriptionCoil Assembly, A/C Clutch; A/C Compressor Clutch
    Other NamesClutch Coil; Clutch Coil Assembly; Coil; Coil, A/C Compressor Clutch Actuating
    Item Dimensions5.7 x 5.6 x 3.3 inches
    Item Weight1.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces06552422, 6552422
    ManufacturerGeneral Motors
    SKU89019185
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1989-2005 Buick CenturyCustom, Estate Wagon, Limited, Special, Special Edition4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
    1989-1990 Buick ElectraLimited, Park Avenue, Park Avenue Ultra, T-Type6 Cyl 3.8 L GAS
    1996-2005, 1989-1993 Buick LeSabreBase, Custom, Limited6 Cyl 3.8 L GAS
    1996-2005, 1991-1993 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1988-2004 Buick Regal25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    1996-1999 Buick RivieraBase6 Cyl 3.8 L GAS
    1992-1998 Buick SkylarkCustom, Gran Sport, Limited, Olympic Gold Edition4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
    1989-1996 Chevrolet BerettaBase, GT, GTZ, Indianapolis 500 Pace Car, Z264 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
    1995-2002 Chevrolet CamaroBase, RS6 Cyl 3.8 L GAS
    1992-2002 Chevrolet CavalierBase, LS, LS Sport, RS, VL, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Is 89019185 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89019185 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair an A/C Clutch on a V7 Direct Mount on Chevrolet Camaro? Posted by Customer
    A:
    Service and repair of the A/C Compressor clutch on v7 direct mount begins by taking the A/C Compressor out of the vehicle. Position the A/C Compressor holding fixture (J 41790) in a vise then secure the A/C Compressor to it. Begin procedure by removing the clutch plate and hub assembly afterward use external snap ring pliers to expose the clutch rotor and bearing assembly retaining ring . The puller pilot (J 33023-A) should be positioned onto the clutch rotor prior to installing the A/C Compressor pulley puller (J 41552) into the rotor's inner slot circle. Using the A/C Compressor pulley puller (J 41552) you should turn its clockwise position in the slot's alignment to attach the rotor tangs. Apply the puller pilot onto the bearing assembly (J 33023-A) and secure it with the A/C Compressor pulley puller (J 41552) as you turn the center forcing screw to extract the clutch rotor and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the V5 Direct Mount A/C Clutch on Chevrolet Impala? Posted by Customer
    A:
    The v5 direct mount compressor clutch service repair starts with inserting the shaft key into the hub key groove 3.2 mm (1/8 in) beyond the keyway while ensuring a proper contact between curved shaft key and hub key groove. Clean both the clutch plate and clutch rotor surfaces before aligning the shaft key with the keyway of the clutch plate and hub assembly. Position the assembly onto the compressor shaft. Install the hub and drive plate installer (J 33013-B) on the opposite end after removing its center screw. After installing the hub and drive plate installer (J 33013-B) along with bearing tools onto the clutch plate and hub assembly use the device to thread the center screw onto the compressor shaft without tightening it. Screw tightness on the hub and drive plate installer's hex body requires several rotations before removal while maintaining the shaft key position. Set the hub and drive plate installer (J 33013-B) back in place between the clutch plate and clutch rotor then adjust its torque until the feeler gauge shows an even 0.40 mm (0.015 in) air gap around the entire assembly. Using the clutch hub holding tool (J 33027-A) hold the clutch plate and hub assembly before installing the compressor shaft nut to a torque of 17 n.m (13 lb ft). Check the pulley rotor's motion by hand before extracting the compressor unit from the compressor holding fixture (J 41790).
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done before aligning the shaft key for the 2001 Chevrolet Camaro? Posted by Customer
    A:
    Clean the surfaces of the clutch plate and clutch rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    How do you remove the hub and drive plate assembly for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Remove the hub and drive plate assembly by turning the center screw into the body of the Hub and Drive Plate Installer (J 33013-B) and against the A/C compressor shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    Q:
    What should be done before aligning the shaft key with the clutch plate for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Clean the surfaces of the clutch plate and clutch rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar A/C Clutch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89019185, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89019185 Coil Assembly. It is sometimes referred to as GM A/C Clutch. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89019185 Coil Assembly. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery